I am installing an Avaya IP Office with R11 SP2 with J100 SIP phones.
Everything has been smooth sailing, well, until I reboot the IP Office.
After the reboot, the J139 and J179 phones seem to lose communications. Buttons stop working and no dial tone.
Reboot the phone and it works fine until the next reboot.
The catch is the J129 phones are not affected.
I have went line by line in the 46xx file and cant seem to find anything that stands out. Any Ideas?
Everything has been smooth sailing, well, until I reboot the IP Office.
After the reboot, the J139 and J179 phones seem to lose communications. Buttons stop working and no dial tone.
Reboot the phone and it works fine until the next reboot.
The catch is the J129 phones are not affected.
I have went line by line in the 46xx file and cant seem to find anything that stands out. Any Ideas?