Morning folks, somewhat green to VoIP and Avaya. So bear with me!
Had an issue this morning where a customer was seeing COR 49 listed as Used when doing a list cor cor 40 to-cor 50 used along with several other CORs though he was not seeing any extensions assigned to 49 under list extension-type cor 40 to-cor 50
I did some testing in our lab and found that when you assign a COR to a station and then remove it it will not show up under "used" but when you assign that COR to an announcement it sticks... meaning if Ann 125 had a COR of 60 and I changed it to COR 65, the system still shows COR 60 as "used" under list cor used despite it not being assigned to anything else in the switch. The same is true for Hunt groups but not VDNs...
Am I missing something or is this some kind of glitch ... looks like our lab is @ 2.1 he is at 1.4
I suck at swversion so the above versions could be way off.
Had an issue this morning where a customer was seeing COR 49 listed as Used when doing a list cor cor 40 to-cor 50 used along with several other CORs though he was not seeing any extensions assigned to 49 under list extension-type cor 40 to-cor 50
I did some testing in our lab and found that when you assign a COR to a station and then remove it it will not show up under "used" but when you assign that COR to an announcement it sticks... meaning if Ann 125 had a COR of 60 and I changed it to COR 65, the system still shows COR 60 as "used" under list cor used despite it not being assigned to anything else in the switch. The same is true for Hunt groups but not VDNs...
Am I missing something or is this some kind of glitch ... looks like our lab is @ 2.1 he is at 1.4
I suck at swversion so the above versions could be way off.