Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO V2 Upgrade

Status
Not open for further replies.

nanoo223

Technical User
Jun 1, 2009
18
US
Hi, All!
I had a IPO500 V2 with 7.0 Software.
after Up Grading to 8.1 and loaded with Essential Edition the Mobile Twinning don't work.
every time i answer the call with my mobile the call went silent.
Please help!!

thank you
EL
 
Be more specific.
What kind of trunks, did you setup mobility properly, what do you see in monitor?

A simple mind delivers great solutions
 
it is running SIP trunk and IP Phone, yes mobility is setup properly, I believe???
I can see the call is going out to my mobile phone via the second line in the SIP trunk in the monitor, when i make test call.
 
You need to set the RTP - RTCP keepalives under the LAN your pushing the SIP over.
 
I just make the change from RTP to RTP-RTCP in LAN>VOIP, but still not working?

thank you
 
sounds like you may have a incorrect codec set, should be set to g.729 under system codecs, make sure this is an available codec to use

acss sme acis sme acss cm 5.2.1 acss cm and cmm
 
smokinjoe, how do you know he needs g729?


BAZINGA!

I'm not insane, my mother had me tested!

 
tlpeter, sorry I assumed this was going across an scn my bad

acss sme acis sme acss cm 5.2.1 acss cm and cmm
 
i thought you had a sixt sence :)


BAZINGA!

I'm not insane, my mother had me tested!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top