Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO SE 12.0/12.1 Routes getting replaced with erroneous default routes on reboot 1

finest

finest

MIS
May 11, 2011
70
US
Avaya has issued a critical patch for this major issue, which could lead to you being locked out of your server or severe traffic misrouting issues Contact Avaya (or me) for details.
 
Sort by date Sort by votes
I see three pages of fixes in the Global IP Office Technical Bulletin R12.1.0.1.0v2.pdf but nothing mentioning the LAN2 default route issue.
 
Upvote 0 Downvote
Based on my conversation with Avaya support, it is not fixed in any of those releases. There is a separate critical patch, and apparently the critical patch will only work on a certain version of the software, which I don’t think is the current version. If that makes sense. Let me know if you want me to attach the documentation I received from Avaya
 
Upvote 0 Downvote
finest said:
Based on my conversation with Avaya support, it is not fixed in any of those releases. There is a separate critical patch, and apparently the critical patch will only work on a certain version of the software, which I don’t think is the current version. If that makes sense. Let me know if you want me to attach the documentation I received from Avaya
Click to expand...
Yes please. Post whatever you got. Thanks a bunch.
 
Upvote 0 Downvote
I am experiencing that now with a new installation of R12.1. After a reboot we lose connectivity to the server. We have to use a keyboard and monitor to change the IP back. Log in as root and enter #sudo ifconfig eth0 255.255.255.0 10.2.205.13 up then reboot
I just upgraded to 12.1.1 and it didn't fix the issue.
I did notice that on the web management. (7071) under settings. The LAN 1 interface and LAN 2 interface are both set to eth0.
Normally it is eth0 for Lan 1 and eth1 for Lan 2
The drop down for Lan 2 doesn't offer eth1, only eth2 and none. I set it to eth2 and save it. DId a test reboot and the Lan 1 interface held. For now.
 
Upvote 0 Downvote
See attached files.
There are two patch files.
VERY IMPORTANT - CAN ONLY BE LOADED ON 12.1.0.0.0 (WHICH IS NOT THE MOST CURRENT VERSION)
IF YOU TRY TO LOAD ONTO CURRENT VERSION YOU WILL BE TOTALLY SCREWED
ALSO NOT THIS PATCH IS NOT INCL. IN THE CURRENT VERSION!
 

Attachments

  • IPOFFICE-180992.zip
    271.7 KB · Views: 8
Upvote 0 Downvote
Is this on HyperV? I see there is an issue with one one Ethernet interface configure on HyperV
 
Upvote 0 Downvote
Our issue was on physical Dell server. Not virtualized. Dell R240.
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

NYSTECH
  • Locked
  • Question
IPO 12.0 Upgrade fails on Dell 630 servers
Replies
8
Views
994
NYSTECH
NYSTECH
William C290
  • Locked
  • Solved
IPO Rls 12.1 Latest Updates 2
2
Replies
21
Views
3K
gkittelson
gkittelson
William C290
  • Locked
  • Question
Avaya IPO Application Server 12.1 Deployed on Hyper-V - Additional HDD Isuue
Replies
4
Views
565
sizbut
sizbut
V
  • Locked
  • Question
control unit with IPO SE license issue
Replies
8
Views
681
Mo. Abdullah
Mo. Abdullah
digital12188
  • Locked
  • Question
IP Office SE 12.0 VM Pro backup issue
Replies
2
Views
490
digital12188
digital12188

Part and Inventory Search

Sponsor

Back
Top