Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO R11.0 & DS30B Port 6 Failures

Status
Not open for further replies.
DTGMI

DTGMI

Vendor
Jun 1, 2006
240
US
Having a very strange issue....

All IP500 DS30 B modules - when connected to R11.0 Control Unit test fine except port 6.

It lights up but no one hone :)

Tried downgrading to R9 CU and it works fine ... back up to the R11.0 CU and port 6 always fails -

Multiple DS30B ... but the DS30B2 doesn't have that issues.

It has to be a SW issue as all the mods work fine on lower releases ...

Any ideas? Haven't seen anything on Avaya support site yet - PCN etc.

Thanks!
 
Status
Not open for further replies.

Similar threads

OmegaStar
  • Locked
  • Question
Avaya IPO R11.0 physical server migrate and update to IP0 R12 VMWare
Replies
1
Views
355
JoConnex
JoConnex
hibroth
  • Question
IPO R11.1 is still supported?
Replies
2
Views
250
nnaarrnn
nnaarrnn
DTGMI
  • Locked
  • Question
IPO VMPRO R4.2 SW
Replies
4
Views
286
DTGMI
DTGMI
atcphone
  • Locked
  • Helpful tip
Avaya IPO Virtualization
Replies
1
Views
479
derfloh
derfloh
NYSTECH
  • Locked
  • Question
IPO 12.0 Upgrade fails on Dell 630 servers
Replies
8
Views
681
NYSTECH
NYSTECH

Part and Inventory Search

Sponsor

Back
Top