ipo <-> ipo voip trunk don't work

[d4rkst4r]

conf.

site a [ipoffice small VCM3]

ip:xxx.xxx.xxx.30
nm:255.255.255.240

line
groupid:56
channel:2
voip
gw:xxx.xxx.xxx.90

ip route:
net: xxx.xxx.xxx.80
mask: 255.255.255.248
gw: xxx.xxx.xxx.1
LAN1

shortcode
code:3N
number:N
line:56
dial


site b [ip403 vcm16]

ip:xxx.xxx.xxx.90
nm:255.255.255.248

line
groupid:61
channel:2
voip
gw:xxx.xxx.xxx.30

ip route:
net: xxx.xxx.xxx.0
mask: 255.255.255.224
gw: xxx.xxx.xxx.94
LAN1

shortcode
code:3N
number:N
line:61
dial


no firewall, no acl
But trunk don't work.
I can't call site b from site a, and can't call site a from site b.
Whath is problem?

 

[intrigrant]

Subnetting:
Site A can only reach xxx.xxx.xxx.17 till xxx.xxx.xxx.30
Site A Gateway = xxx.xxx.xxx.1 = problem
Site B can only reach xxx.xxx.xxx.81 till xxx.xxx.xxx.94
Site B Gateway = xxx.xxx.xxx.94 = OK
Either the gateway on Site A must be in range of IPO or the subnet of IPO must be adjusted to 0.

 

[d4rkst4r]

sorry, my mistake
subnet on site a is xxx.xxx.xxx.224.

from site a I have trunk to definity and working
from site b I have trunk to another ipo and working.

only this trunk dont work

 

[yeehaababy]

Is SCN turned on? you have short codes that are not neccessary if it is. The gateway iP address on the voip line is the IPO at the far site? No name/number conflicts across the network? take into account numbers assigned to spare ports as well.

 

[d4rkst4r]

SCN?
i must have shortcode.
yes, the gateway ip address is ip address of another sute.
no conflict with ip address or dns records.

 

[d4rkst4r]

still don't work
any help?

 

[jconrad0305]

scn is voice networking under the system tree

 

[intrigrant]

SCN won't help.
Connect your PC in site A on the LAN give it a IP Address in the same subnet as the IPO and make the IPO the gateway.
Then ping IPO at Site B if it fails then check the IP settings.
Do the same at Site B.

 

[d14v0l0]

ping working.
but trunk no

 

[d14v0l0]

I find network problem.
Now trunk work.

TNX

 

[intrigrant]

What went wrong? Just curious...

 

[d14v0l0]

ACL on router becouse is 1 m long

 

[intrigrant]

Hoe bedoel je?
I'm not english so whats a ACL ( Access Control List? ), can this be longer then 1 meter?

Haha, i'm glad it works.

 

[d14v0l0]