Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO and Cisco PAP2T

Status
Not open for further replies.

djuplift

IS-IT--Management
Jan 9, 2008
573
US
Anyone got a good set of instructions for configuring one of these to register with the IP Office?

Does anyone know how to get one of these to work with an IPO?

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
I would imagine you would just tie the two analog ports on the PAP2T into the Analog Trunk ports on the IPO.
 
No I am trying to make a sip connection so I can call out using the IP Office's trunks. The IP Office will see this as a 3rd party endpoint.

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
So right now I am trying to get this thing to successfully register with the IP Office as an Extension.

Need Help..

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
The PAP2T says's cannot connect to login server and here is the sysmon out put I get when trying to make a call

2520258478mS H323Evt: Recv: RegistrationRequest 10.168.70.79; Endpoints registered: 2; Endpoints in registration: 0
2520268173mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
2520268176mS SIP Call Rx: phone
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
2520268660mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
2520268664mS SIP Call Rx: phone
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
2520269661mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
2520269664mS SIP Call Rx: phone
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
2520271660mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
2520271664mS SIP Call Rx: phone
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv

********** SysMonitor v8.1 (5) [connected to 10.168.70.28 (CR Choice)] **********
2520274132mS PRN: Monitor Status IP 500 6.0(14)
2520274132mS PRN: LAW=U PRI=0, BRI=0, ALOG=8, ADSL=0 VCOMP=32, MDM=0, WAN=0, MODU=0 LANM=0 CkSRC=0 VMAIL=1(VER=3 TYP=1) CALLS=1(TOT=1879)
2520275660mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
2520275663mS SIP Call Rx: phone
INVITE sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 INVITE
Max-Forwards: 70
Contact: SIPchoice <sip:SIPchoice@10.168.70.91:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 440
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp

v=0
o=- 25175 25175 IN IP4 10.168.70.91
s=-
c=IN IP4 10.168.70.91
t=0 0
m=audio 16424 RTP/AVP 18 0 2 4 8 96 97 98 100 101
a=rtpmap:18 G729a/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
a=fmtp:100 192-193
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
2520277017mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520277019mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520277516mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520277518mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520277635mS H323Evt: Recv: RegistrationRequest 10.168.70.40; Endpoints registered: 2; Endpoints in registration: 0
2520278516mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520278517mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520280516mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520280518mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520284516mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520284517mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520288515mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520288517mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520292515mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520292517mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520296515mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520296517mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520300515mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520300517mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520304515mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520304517mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520308515mS SIP Rx: UDP 10.168.70.91:5060 -> 10.168.70.28:5060
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520308517mS SIP Call Rx: phone
CANCEL sip:913194008669@10.168.70.28 SIP/2.0
Via: SIP/2.0/UDP 10.168.70.91:5060;branch=z9hG4bK-903a2534
From: SIPchoice <sip:SIPchoice@10.168.70.28>;tag=1d7bf76cb846245ao0
To: <sip:913194008669@10.168.70.28>
Call-ID: b0835a54-6c97de92@10.168.70.91
CSeq: 101 CANCEL
Max-Forwards: 70
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0

2520310752mS PRN: PCMCIA0 ConfigInfo: DevType=0x0d FuncCode=0x04 SysInit=0x01 ManuCode=0x947f ManuInfo=0x0007
2520310752mS PRN: PCMCIA0 ConfigInfo: DevType=0x0d FuncCode=0x04 SysInit=0x01 ManuCode=0x947f ManuInfo=0x0007
2520310753mS PRN: PCMCIA0 ConfigInfo: DevType=0x0d FuncCode=0x04 SysInit=0x01 ManuCode=0x947f ManuInfo=0x0007
2520310754mS PRN: PCMCIA0 ConfigInfo: DevType=0x0d FuncCode=0x04 SysInit=0x01 ManuCode=0x947f ManuInfo=0x0007
2520310754mS PRN: PCMCIA0 ConfigInfo: DevType=0x0d FuncCode=0x04 SysInit=0x01 ManuCode=0x947f ManuInfo=0x0007
2520313482mS H323Evt: Recv: RegistrationRequest 10.168.70.79; Endpoints registered: 2; Endpoints in registration: 0
2520315371mS RES: Wed 22/12/2010 13:13:53 FreeMem=69553692(2) CMMsg=9 (11) Buff=200 909 999 7420 3 Links=20674
2520315371mS RES2: IP 500 6.0(14) Tasks=37 RTEngine=0 CMRTEngine=0 ExRTEngine=0 Timer=50 Poll=0 Ready=0 CMReady=0 CMQueue=0 VPNNQueue=0 Monitor=2 SSA=0 CF=MNTD
2520320371mS RES: Wed 22/12/2010 13:13:58 FreeMem=69555480(2) CMMsg=9 (11) Buff=200 909 1000 7416 3 Links=20671
2520320371mS RES2: IP 500 6.0(14) Tasks=37 RTEngine=0 CMRTEngine=0 ExRTEngine=0 Timer=48 Poll=0 Ready=0 CMReady=0 CMQueue=0 VPNNQueue=0 Monitor=2 SSA=0 CF=MNTD
2520332632mS H323Evt: Recv: RegistrationRequest 10.168.70.40; Endpoints registered: 2; Endpoints in registration: 0


ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
Did you fill in the Proxy address?
This needs to be the IP address of the IPO.

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
Yes I did, I am not sure which information goes where in terms of Auth ID or ID or the extension number.

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
Here are the settings i mostly use;
The dialplan is Dutch, but you know the idea.

LINE1/2

Subscriber information;
Display name= User name
Password= Login Code (extension force auhtoris. unticked)
Auth ID= extension number
User ID= extension number

Sip settings;
SIP-Proxy require= IP addr of the Avaya

Proxy and Registration;
Proxy= IP addr of the Avaya
Outbound Proxy= IP addr of the Avaya

Dialplan;

Default: (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)

AVAYA: (11x|1xxx|[2-9]xxxxx|0[1-7]xxxxxxxx|0800x.|0900x.|08[1-9]xxxxxxx|00x.)

Call progress tone;

Default;350@-19,440@-19;10(*/0/1+2)

AVAYA; 400@-9;30(*/0/1)

Busy tone;

Default; 480@-19,620@-19;10(.5/.5/1+2)

AVAYA; 400@-20;70.875(.375/.375/1)

Reorder tone;

Default; 480@-19,620@-19;10(.5/.5/1+2)

AVAYA; 400@-20;70.875(.375/.375/1)

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
Awesome when i get back to this tomorrow i will try that I can see several things I have wrong..

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
what do you mean by this (extension force auhtoris. unticked)?

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
He means that on the IPOffice extension tab the 'Force Authorisation' should be unticked.

Maybe you'll have to upgrade the Pap2T as well in the monitor trace it shows on version 3.1.15. The most current release is 5.1.6


I seem to remember that the under the RTP parameter the 'RTP Packet Size' should be adjusted from the default 0.030 to 0.020. But that could be an adjustment neccesary for another type of Pabx.
 
OK so I defaulted the PAP2T and using your settings, I still receive a cannot connect to login server on PAP2T, I receive the following error in sysmon:

2940570041mS Sip: SIP REG: ProcessRegistrationRequest, delete phone receiver 386 if phone size is 0 (size: 0)
2940570042mS Sip: SIP REG: user 821 not found

Are you sure I am putting the correct info in the user ID/Auth ID etc.. I double checked the password settings so I know I am using the correct one.

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
Delete the user in the IPO.

Goto;

x.x.x.x/admin/reboot or pull the PAP2T to reboot it.

Is should auto create an extension/user

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
I got it to work by enabling: IP dialing



ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
Also i can dial out fine using the default dial plan but it takes forever, I assume modifying/customizig the dial plan would help fix this? If so how should it look for North American area code 319 on an IP Office? I am really confused about how the dial plan works.

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
Thanks.

ACA - Implement IP Office
ACSS - SMEC (IP Office)
JNCIA-EX
JNCIA-ER
JNCIA-FWV
Convergence+
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top