Hi,
Did anyone has experience with aiws and sms.
We have to send sms message from a mobicall server.
We followed the "install procedure" which looks very basic:
1. The DECT Interface should be configured to send User Data to the OAP Server.Click
“Configuration” on the start page.
2. Select Other Settings > Advanced Configuration in the menu on the Configuration page.
3. Under DECT Interface, click “Message Distribution” in the menu on the Advanced
Configuration page.
4. Select “Alarm”.
5. Enter the address xxx.xxx.xxx.xxx/OAP in one of the address fields.
6. Click “Activate”.
If we go to send message in teh aiws of in the aiws oap, with none of the the dect receive a sms.
What can we chect to be sure everything is up and running , wat do we have to configure ?
It's look very difficult to find manuals about that device.
Thx
ACIS - ACSS
Did anyone has experience with aiws and sms.
We have to send sms message from a mobicall server.
We followed the "install procedure" which looks very basic:
1. The DECT Interface should be configured to send User Data to the OAP Server.Click
“Configuration” on the start page.
2. Select Other Settings > Advanced Configuration in the menu on the Configuration page.
3. Under DECT Interface, click “Message Distribution” in the menu on the Advanced
Configuration page.
4. Select “Alarm”.
5. Enter the address xxx.xxx.xxx.xxx/OAP in one of the address fields.
6. Click “Activate”.
If we go to send message in teh aiws of in the aiws oap, with none of the the dect receive a sms.
What can we chect to be sure everything is up and running , wat do we have to configure ?
It's look very difficult to find manuals about that device.
Thx
ACIS - ACSS