Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO 8.1 sip to Flowroute carrier and twinning issue

Status
Not open for further replies.

StreamlineNet

Vendor
Jun 5, 2006
32
US
I am having an issue with a customer using twinning through flowroute. Everything works except when people call his number directly, the call setup is done, you get the ring and the offhook is completed, it just never passes the bearer with the codec and voice traffic.

If you transfer a call to his extension the call works completely (Blind and assited transfer).

Any help on something i may have missed would be apreciated.

Thanks,
Jason
 
There was a bug in earlier versions of IP Office firmware with this exact problem -- it's not related specifically to Flowroute.

What IP Office do you have, and what version firmware?
 
Play with the refer option.
This have helped me before.

BAZINGA!

I'm not insane, my mother had me tested!

 
Worked with every veriation of refer section. Stll not working
Recap: it works on transfer,but does not work on direct extension.

No firewall using LAN2 for the SIP Trunk access.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top