Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO-1 "No Pool" alarm

Status
Not open for further replies.

cooley6361

Technical User
Joined
Feb 14, 2017
Messages
13
Location
US
In my IP Office I have 2 500 units this morning we had both IPO 500's go down on cold restart with an alarm saying "No Pool" first time we're seeing this alarm to cause a cold restart, now we just replaced the chassis for both 500 units because we were experiencing at least 2 cold restarts a day from Mon-Wed with alarms "No Memory" anyone have any ideas
 
What version of software are the units on?
 
So the obvious 1st step is to get them on the latest maintenance release


Do things on the cheap & it will cost you dear
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top