reservenu1100
Technical User
- Dec 26, 2010
- 14
HI any experts !
Can you tell me if it´s possible to make a ldk-24 sw 3.7
show incomming callerid from co lines ?
I have removed the brib card, and mounted 1 lcob2,(here is only 2 pstn lines- 2 pcs 7024d is connected) and
made the restart procedure as battsw off, and sw 4 on and off as written in the manual and the ldk found all the cards
in the new configuration.
the 2 co lines are placed in group 1, and everything works fine, callerid (cli) from local to local is ok. but no id
from the co lines. - hope you have an answer
thanks in advance
Can you tell me if it´s possible to make a ldk-24 sw 3.7
show incomming callerid from co lines ?
I have removed the brib card, and mounted 1 lcob2,(here is only 2 pstn lines- 2 pcs 7024d is connected) and
made the restart procedure as battsw off, and sw 4 on and off as written in the manual and the ldk found all the cards
in the new configuration.
the 2 co lines are placed in group 1, and everything works fine, callerid (cli) from local to local is ok. but no id
from the co lines. - hope you have an answer
thanks in advance