Ip500 with era 3500 switch 1

[BristolD]

Hi

I have set up an iPo on 192.168.42.1 with dhcp
An Avaya ers3500 switch on 192.168.42.254 / 192.168.44.254

Ip phones are registering to the iPo with no issues and I can log them on and call between them.

When I connect my laptop to the switch I cannot ping the iPo or find it with manager.

I think this is either the ip route on the iPo or the address given to my laptop .

I have tried variations but still cannot see he iPo.

Any sugestions ?

Thanks

 

[snowman50]

I will assume you are on a vlan.

You need routes between the vlans.

 

[BristolD]

Hi snowman

Yes the switch sets itself with voice vlan 42 and data vlan 44

I have set my laptop with an ip on both but can't see the iPo

What route would I need to add to the iPo ?

 

[TouchToneTommy]

Configure a port on the ERS with PVID 44 and plug your laptop in there.

 

[BristolD]

Thanks tommy, I'll try this first thing

 

[TouchToneTommy]

And I meant the Voice vlan, so PVID 42

 

[bluemr2]

You need to use 44.254 as the default gateway on your pc. Make sure your default gateway in the IPO is set to 42.254. You need to use the switch IP to route between VLAN’s.

 

[BristolD]

Thanks all for your help

I added a static route to the ipo of
192.168.44.0
255.255.255.0
192.168.42.254

gave my laptop an ip on the .44 range with default gateway of 192.168.44.254

And I can connect and ping the ipo from any port on the switch

Thanks again