IP500 BT Branding 1

[TeleBug27]

How can you tell if an Ip500 has BT Branding?

 

[Pepp77]

By the poor way it is programmed. Loads of unused groups, user rights etc etc.

| ACSS SME |

 

[TeleBug27]

the unit has been defaulted

 

[Pepp77]

Might not be BT branded then as from memory even after being defaulted there are differences from normal.

| ACSS SME |

 

[IPGuru]

if the phones screen saver say BT then it has been BT branded at some time



Do things on the cheap & it will cost you dear

 

[snowman50]

Check the licence file ..
It will say some thing about ip office branding licence

The screen will also say " BT Ip Office

 

[hibroth]

No way to erase that branding? I've got one, system SD has ben formatted and re-created, no chance?

 

[hairlessupportmonkey]

nope

ACSS - SME
General Geek

 

[Westi]

funny thing is that even in north American systems the BT screen saver jpg is in the files, it is just not used.

I feel for you but TBH a new processor is not that expensive, you can re-use the rest of the hardware and the license key / SD card but you need to format the SD card before you go ahead.

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

[amriddle01]

Change the jpeg to your own

 

[OmegaNZL]

Double check any trial licenses you get from PLDS too. Have seen a couple of Server Editions need reinstalling when BT branding showed up out of the blue with their endpoint licenses!

 

[IPGuru]

Change the jpeg to your own

Have you tried that (on a BT branded unit)?
last time I did it still would not work


Do things on the cheap & it will cost you dear

 

[TeleBug27]

had a Ip500v2 back that was reported to have a BT Branding issue, Tested it at R6.1 as no licence required with a 9621G. Set the screensaver on, using default logo. Showed Avaya OneX. Could it only show up on later versions with a licence installed?