Hello, gentlemen.
I made a cluster with two MXe III. The MCD is 5.0 SP2 PR2. The cluster is working fine.
I need to do an IP trunk between this cluster and a 3300 ICP at Singapore.
I think I need to programm in the Singapore Network Elements form both infos from the clustered MXe's and programm all the IP trunk in the same way. The only difference is at the digits dialed in Singapore system that should pointing to the PNI.
Bellow is the configuration I think I should make in Singapore's MCD.
Network Elements
Singapore - type 3300 ICP - PBX ID 29 - IP 10.101.8.21 - data sharing no
MXe1 - type 3300 ICP - PBX ID 30 - IP 10.106.8.10 - data sharing no
MXe2 - type 3300 ICP - PBX ID 31 - IP 10.107.8.10 - data sharing no
Cluster Elements (do I need to fill this form in Singapore system?)
Cluster Elements
MXeBR - PNI 111
Cluster Members
MXe1 - PBX ID 30 - CEID Digits 11130 - Local No - Feature DN 1030
MXe2 - PBX ID 31 - CEID Digits 11131 - Local No - Feature DN 1031
IP/XNET
ICP/PBX Networking
Profile
PBX# 29 - Network Element Singapore - Local Yes - Max VoIP 30 - Max VoTDM 30
PBX# 30 - Network Element MXe1 - Local No - Max VoIP 30 - Max VoTDM 30
PBX# 31 - Network Element MXe2 - Local No - Max VoIP 30 - Max VoTDM 30
IP Networking
PBX 29 - Network IP Address 10.101.8.21
PBX 30 - Network IP Address 10.106.8.10
PBX 31 - Network IP Address 10.107.8.10
IP/XNET Trunk Profiles
Local Profile # 1 - Trunk Service # 2 - Interconnect # 1 - Remote Profile # 1
IP/XNET Trunk Groups
Xnet Trk Grp # 1 - PBX # 30 - Local Prof # 1 - Max Hops 26 - Net Signal IP - Voice Med Type IP - # of Trks 30
Xnet Trk Grp # 2 - PBX # 31 - Local Prof # 1 - - Max Hops 26 - Net Signal IP - Voice Med Type IP - # of Trks 30
Trunk Attributes
Trunk Service # 2 - Release No - Call Recognition Off - CoS 6 - CoR 1 - Baud 9600 - Intercept # 1 - Trk Label IP Trunk
ARS Digits Dialed
111XXXX route 10 (no digits to follow)
111XXXX route 11 (no digits to follow)
ARS Digit Modification Plans
1 - absorb 0 - inserted 0
ARS Routes
10 - IP/XNET Trk Grp 1 - Dig Mod # 1
11 - IP/XNET Trk Grp 2 - Dig Mod # 1
Is this correct?
Thank you.
I made a cluster with two MXe III. The MCD is 5.0 SP2 PR2. The cluster is working fine.
I need to do an IP trunk between this cluster and a 3300 ICP at Singapore.
I think I need to programm in the Singapore Network Elements form both infos from the clustered MXe's and programm all the IP trunk in the same way. The only difference is at the digits dialed in Singapore system that should pointing to the PNI.
Bellow is the configuration I think I should make in Singapore's MCD.
Network Elements
Singapore - type 3300 ICP - PBX ID 29 - IP 10.101.8.21 - data sharing no
MXe1 - type 3300 ICP - PBX ID 30 - IP 10.106.8.10 - data sharing no
MXe2 - type 3300 ICP - PBX ID 31 - IP 10.107.8.10 - data sharing no
Cluster Elements (do I need to fill this form in Singapore system?)
Cluster Elements
MXeBR - PNI 111
Cluster Members
MXe1 - PBX ID 30 - CEID Digits 11130 - Local No - Feature DN 1030
MXe2 - PBX ID 31 - CEID Digits 11131 - Local No - Feature DN 1031
IP/XNET
ICP/PBX Networking
Profile
PBX# 29 - Network Element Singapore - Local Yes - Max VoIP 30 - Max VoTDM 30
PBX# 30 - Network Element MXe1 - Local No - Max VoIP 30 - Max VoTDM 30
PBX# 31 - Network Element MXe2 - Local No - Max VoIP 30 - Max VoTDM 30
IP Networking
PBX 29 - Network IP Address 10.101.8.21
PBX 30 - Network IP Address 10.106.8.10
PBX 31 - Network IP Address 10.107.8.10
IP/XNET Trunk Profiles
Local Profile # 1 - Trunk Service # 2 - Interconnect # 1 - Remote Profile # 1
IP/XNET Trunk Groups
Xnet Trk Grp # 1 - PBX # 30 - Local Prof # 1 - Max Hops 26 - Net Signal IP - Voice Med Type IP - # of Trks 30
Xnet Trk Grp # 2 - PBX # 31 - Local Prof # 1 - - Max Hops 26 - Net Signal IP - Voice Med Type IP - # of Trks 30
Trunk Attributes
Trunk Service # 2 - Release No - Call Recognition Off - CoS 6 - CoR 1 - Baud 9600 - Intercept # 1 - Trk Label IP Trunk
ARS Digits Dialed
111XXXX route 10 (no digits to follow)
111XXXX route 11 (no digits to follow)
ARS Digit Modification Plans
1 - absorb 0 - inserted 0
ARS Routes
10 - IP/XNET Trk Grp 1 - Dig Mod # 1
11 - IP/XNET Trk Grp 2 - Dig Mod # 1
Is this correct?
Thank you.