Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP phones under BP!

Status
Not open for further replies.

rfpup

Technical User
Dec 1, 2004
334
US
I changed the default password at d42x02-config.txt file but the change is valid only when accessing the phone via telnet and not via http. I have to use factory default password when accessing the phone via http.

I am trying two configurations with DBC42202 IP phones
a. application R3B, boot R3B
b. application R3B, boot R3D

Any idea?

Thank you
 
Hi rfpup!

Can you provide your d42x02-config.txt please?

regards,

bpczi
 
Hi rfpup!

Which password do you want to change?

regards,

bpczi
 
Hi bpczi,

Part of my config file is attached. I have changed the password that allows you to access the phone via http or telnet to its IP address as you may see in blue color.
The change is ok when accessing the phone via telnet but when you access the phone via http you need factory default password.

Thank you
;System=WEBSWITCH3
;System=BP
System=BP-R15
;System=MD110
;System=MD-E
;System=MX-ONE
OverLap=YES
RRQTtl=600
GatekeeperID=test
;Domain=ebc.ericsson.se
PrimaryGKAddress=a.b.c.d
;SecondaryGKAddress=192.168.0.1
GatekeeperDiscovery=NO
AdminPasswd=dRQebSccz
;LogOffRestriction=LogOffAllowed
;LogOffRestriction=DefaultNumberUsed
;LogOffRestriction=PermitIndividualLogOn
 
This situation is fixed in the next application R4A

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top