IP phones under BP!

[rfpup]

I changed the default password at d42x02-config.txt file but the change is valid only when accessing the phone via telnet and not via http. I have to use factory default password when accessing the phone via http.

I am trying two configurations with DBC42202 IP phones
a. application R3B, boot R3B
b. application R3B, boot R3D

Any idea?

Thank you

 

[bpczi]

Hi rfpup!

Can you provide your d42x02-config.txt please?

regards,

bpczi

 

[bpczi]

Hi rfpup!

Which password do you want to change?

regards,

bpczi

 

[rfpup]

Hi bpczi,

Part of my config file is attached. I have changed the password that allows you to access the phone via http or telnet to its IP address as you may see in blue color.
The change is ok when accessing the phone via telnet but when you access the phone via http you need factory default password.

Thank you
;System=WEBSWITCH3
;System=BP
System=BP-R15
;System=MD110
;System=MD-E
;System=MX-ONE
OverLap=YES
RRQTtl=600
GatekeeperID=test
;Domain=ebc.ericsson.se
PrimaryGKAddress=a.b.c.d
;SecondaryGKAddress=192.168.0.1
GatekeeperDiscovery=NO
AdminPasswd=dRQebSccz
;LogOffRestriction=LogOffAllowed
;LogOffRestriction=DefaultNumberUsed
;LogOffRestriction=PermitIndividualLogOn

 

[rfpup]

This situation is fixed in the next application R4A