Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Phones and SCN

Status
Not open for further replies.

cjinsocal581

Programmer
Feb 5, 2005
168
US
I have a two node system with IP406v2 at each end and are communicating via SCN. I have 5 IP Phones off of the first node.

Here is the issue. When a user (IP Phone) calls the 2nd node system, they hear ringing and node 2 answers. But once the call is connected, the callers cannot hear each other.

Now for the twist, The IP Phones can Intercom Dial node 2 with success!!

Any ideas?
 
Had the same issue - and I had some ringing fine and connecting great but no displays - all turned out to be UDP settings. what type of switches are you running the network on?

Ian Engel
Agua Fria Communications
 
Check the job aids - there are a few UDP's that have to have access and it needs to be a level 2-3 w/ QOS. Don't quote me but I would definitely chase the ports first I have seen too many quirky issues like this.

Ian Engel
Agua Fria Communications
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top