vfonseca76
IS-IT--Management
Hi all
I'm installing a new IP Office system with a AVPP to control the WiFi phones.
The phones register on the PBX, I can see them on system status, but the phones won't make nor receive any calls.
I've traced the traffic on the switch and I can see the packets going from the phone to the AVPP and from the AVPP to the IP500, but I cant figure out anything from that except that they can see each other...
I've been through all manuals and guides on the Avaya support site I could find, plus some info on Polycom and here, but i'm still stuck....
One thing seems odd on the SVP stats... the socket's are all in use, although no calls are in place..
Network Status
Hostname: [AVPP_01], Address: 10.0.0.224
Ethernet Address: 00:90:7A:0E:6F:8A Net: 100/full
System Uptime: 0 days, 02:34 Max calls: 80
RX: bytes packets errors drop fifo alignment multicast
2906156 28000 0 0 0 0 160
TX: bytes packets errors drop fifo carrier collisions
767719 5262 0 0 0 0 0
SVP-II Sockets in Use (Last / Max): 8 / 8
SVP-II Access Points in Calls (Last / Max): 0 / 1
SVP-II Telephones in Use (Last / Max): 2 / 2
SVP-II Telephones in Calls (Last / Max): 0 / 1
SVP-II SRP Audio (Delay / Lost): 0 / 0
Does anybody have in insight on this ? I could really use some help...
Best regards to all.
Vasco
I'm installing a new IP Office system with a AVPP to control the WiFi phones.
The phones register on the PBX, I can see them on system status, but the phones won't make nor receive any calls.
I've traced the traffic on the switch and I can see the packets going from the phone to the AVPP and from the AVPP to the IP500, but I cant figure out anything from that except that they can see each other...
I've been through all manuals and guides on the Avaya support site I could find, plus some info on Polycom and here, but i'm still stuck....
One thing seems odd on the SVP stats... the socket's are all in use, although no calls are in place..
Network Status
Hostname: [AVPP_01], Address: 10.0.0.224
Ethernet Address: 00:90:7A:0E:6F:8A Net: 100/full
System Uptime: 0 days, 02:34 Max calls: 80
RX: bytes packets errors drop fifo alignment multicast
2906156 28000 0 0 0 0 160
TX: bytes packets errors drop fifo carrier collisions
767719 5262 0 0 0 0 0
SVP-II Sockets in Use (Last / Max): 8 / 8
SVP-II Access Points in Calls (Last / Max): 0 / 1
SVP-II Telephones in Use (Last / Max): 2 / 2
SVP-II Telephones in Calls (Last / Max): 0 / 1
SVP-II SRP Audio (Delay / Lost): 0 / 0
Does anybody have in insight on this ? I could really use some help...
Best regards to all.
Vasco