Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office Voicemail Access

Status
Not open for further replies.

Jerrberr

Technical User
Aug 14, 2006
95
US
Jerrberr (TechnicalUser) Jun 5, 2009
I have an IP Office 500 Pro with Voicemail Pro.
I have an 4424D+ on the Operator Position.

I need to create access to Voicemail for the Operator to collect messages from other extensions. She will check when the user is out.
Currently what happens with a voicemail button programmed, is the voicemail goes streight to the operator extension mailbox without the promt for an extension.
The message button on my 5410 sets prompt an extension however I cannot seem to mimic this on a button for the 4424D+.

How do I program this VM buttton?

Jerry

 
Make a button with the action of dial and the number *17.

Kevin Wing
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
 
Or make a new short code

code: *77
Feature: voicemail collect
Telephone number: "Anonymous"
Line group ID:0

Then set up a voicemail code on the user tab/voicemail
this would allow access into the mail boxes.

You could then program a button as dial *77 lable it as MSG



Success is going from failure to failure without a loss of enthusiasm.Or is that another upgrade?

ACA - Implement IP Office
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top