Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office upgrade from v1 to v2...HELP

Status
Not open for further replies.

gee123

Technical User
Jun 19, 2010
1
GB
I have a old IP Office 500 v1 and want to use the new 1608-I phones, but i need a upgrade…2 questions:

1) where can I find the upgrade?

2) How to do it?

HELP………………..
 
You'll need to contact you installer for the licence and software.

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
you can use those phones on 5.0.20 with a V1 and no upgrade license. i did it the other day

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
 
Hsm is old, the ipo is not.
Like said you can use those phones on 5.0.20


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

A yard full of tards
 
To use 1608I phone, i have upgrade my IPO V5 to V6
I had to buy :
- a upgrade licence to V6
- a endpoint licences (1 endpoint licence = 1 user in manager..... if you have a VCM32, this included 12 licences endpoint.)

finally you must update firmware of 16xx I phones (usual)
 
plus v6 will run on an ip500 v1 - its the same hardware just with a different licence key and v/mail SD card all rolled into one.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top