IP Office upgrade from v1 to v2...HELP

[gee123]

I have a old IP Office 500 v1 and want to use the new 1608-I phones, but i need a upgrade…2 questions:

1) where can I find the upgrade?

2) How to do it?

HELP………………..

 

[Bas1234]

You'll need to contact you installer for the licence and software.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[kwing112000]

you can use those phones on 5.0.20 with a V1 and no upgrade license. i did it the other day

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[hairlessupportmonkey]

btw - ip500 v1 isnt old... lol

 

[tlpeter]

Hsm is old, the ipo is not.
Like said you can use those phones on 5.0.20


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

A yard full of tards

 

[maxence]

To use 1608I phone, i have upgrade my IPO V5 to V6
I had to buy :
- a upgrade licence to V6
- a endpoint licences (1 endpoint licence = 1 user in manager..... if you have a VCM32, this included 12 licences endpoint.)

finally you must update firmware of 16xx I phones (usual)

 

[TeleEngineer]

Like TlPeter sad 1608I is supported in 5.0.20

 

[hairlessupportmonkey]

plus v6 will run on an ip500 v1 - its the same hardware just with a different licence key and v/mail SD card all rolled into one.