Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office trunks 1

Status
Not open for further replies.

streaker1974

Technical User
Mar 9, 2011
28
US
I just read that if a customer has 3 analog trunks, and a 4-port analog trunk module, you don't have to do anything in the programming. I always thought you had to put the 4th trunk "out-of-service", or assign a different line group ID to it. Have I been wrong all this time? Is there a way to put it "out of service" without having to reboot?
 
You can just put it into out of service from the drop down...no reboot needed (not with newer releases, anyhow).
But I would put that last line into another group anyhow.

-Austin
I used to be an ACE. Now I'm just an Arse.
qrcode.png
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top