IP Office to Cisco Call Manager Express

[kokolatas]

Hi,

i have set up an IPO and a Cisco 2811 CME with an IP (H.323) link between them and it works perfect.
I have also accomplish to make calls from the IPO using the Cisco BRI Trunk.

Can i do the opposite?
I want to make the IPO capable to initiate a call from it's own trunks when it receives a call from the cisco.
eg, the cisco sends 9110xxxxxxx via the ip trunk and the IPO makes a call to that number.when the call setup finished the cisco user talks inside the IP Office's trunks.
How could the config look like?

 

[tlpeter]

Just use a system shortcode that matches the digits that are send to the ipoffice

ACA - Implement IP Office
ACS - Implement IP Office
ACA - Implement IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[kokolatas]

Just that?

a simple shortcode like that 9N/DIAL/N/0 would be enough?

what about the Incoming Call Route? Should i put anything there?

 

[tlpeter]

Iptrunks do not use the incoming call route

Let's say you get 1234 as digitis from the Cisco

Then make a shortcode

1234
dial
9N
line id 0

ACA - Implement IP Office
ACS - Implement IP Office
ACA - Implement IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[kokolatas]

thanks, as soon as I'll try that i will let you know