IP Office Putty 2

[RickAntilles]

Howdy all. I am attempting to connect to IP Office VIA Putty 0.78. I have the settings as 38400/8/1/none/none. Everything I fond says to set the emulation to VT100 or TTY. I am unable to find where to set the emulation. When I attempt to connect the window opens but the prompt is unresponsive. I have been banging my head against the wall with this. Any help would be appreciated. Thanks.

 

[sizbut]

set term=vt100

Yes, I Googled it.

Stuck in a never ending cycle of file copying.

 

[RickAntilles]

The question is where in the settings does that go. I know what the setting is supposed to be the issue is where to put it.

 

[sizbut]

[ol 1]
[li]Command line, enter putty.[/li]
[li]Select Terminal | Keyboard.[/li]
[li]Select VT100+.[/li]
[li]Adjust any other values you want.[/li]
[li]Select Session.[/li]
[li]Enter a name in Saved Sessions.[/li]
[li]Click Save so you can reload the settings in future.[/li]
[li]Click Open.[/li]
[/ol]




Stuck in a never ending cycle of file copying.