Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office Paging use Extension PORT 1

Status
Not open for further replies.

Jhon88

Technical User
Nov 29, 2015
75
ID
Hi All Masters,

I Have a plan to integrate IP Office with load speaker using analog amplifier to get paging them use extension port. detail scenario like this
layout_xg1swm.png


some online data say:
2_glzbvl.png


according above data, how PIN OUT interconnection from POTS port with analog AMPLIFIER PORT. there are any port in analog amplifier like Aux In, Line in port.

doesn't need some capacitor or resistor to make same impedance between IPO and Amplifier when it connected ?
 
Yes it is mandatory to have a capacitor and a line transformator beteren them.
Use a BOGEN interface
 
As intrigrant says you need a transformer for isolation and to loop the port - it is in the manuals
More likely you'll want to add a device to do VOX switching, either to allow background music when there's no paging (or allowing the usual paging mic to be used) or maybe just to avoid the background hiss that's inevitable with a PA when there's no input. There are many options and some amps already have this stuff built in.
 
should I need to set wiring like this .. with UPAM module
3_m0uanu.png


so we can not connect directly from station port to Line IN port in analog amplifier., right ?
 
you should always use a transformer not a resistor (for isolation) and that doesn't look like the last UPAM I saw (but that was quite a long time ago) so I can't really comment more.

EDIT - and the UPAM (Bogen TAM-B) was not useable for an extension port set as paging speaker to my memory.

Maybe you could clarify exactly what you are trying to do - for example you you need the port set as paging speaker? (to do mixed phone and PA paging)
 
intrigrant said:
40 years of experience, there is not a lot that can beat that.

But with respect, the IP Office manual says that the port must be connected at boot so that implies that the IP Office is reliant on detecting a DC loop condition, which won't be possible given your inclusion of a capacitor...
 
Excellent spot TTT - the Paging interface device we used in the past is no longer in the Viking product listing and the one they have looks different enough for me to be nervous of suggesting it without having used it myself (or a trusted colleague).
Have a Star
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top