Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ip Office Manager Port 1

Status
Not open for further replies.

coolbrad

IS-IT--Management
Aug 4, 2005
55
US
Can any one tell me what port that IP Office listens on for Manager. I want allow access in my firewall.
 
20 File Transfer [Default Data]

• 21 File Transfer [Control]

• 23 Telnet

• 25 Simple Mail Transfer

• 37 Time

• 43 Who Is

• 53 Domain Name Server

• 67 Bootstrap Protocol Server

• 68 Bootstrap Protocol Client

• 69 Trivial File Transfer

• 70 Gopher

• 79 Finger

• 80 World Wide Web-HTTP

• 115 Simple File Transfer Protocol

• 123 Network Time Protocol

• 137 NETBIOS Name Service

• 138 NETBIOS Datagram Service

• 139 NETBIOS Session Service
• 156 SQL Service

• 161 SNMP

• 162 SNMPTRAP

• 179 Border Gateway Protocol

• 1719 H.323Ras

• 1720 H.323/H.245

• 50791 IPO Voicemail

• 50792 IPO Network DTE

• 50793 IPO Solo Voicemail (i.e. Wave driver for TAPI)

• 50794 IPO Monitor

• 50795 IPO Voice Networking

• 50796 IPO PCPartner

• 50797 IPO TAPI

• 50798 IPO Who-Is response

• 50799 IPO BLF

• 50800 IPO License Dongle

• 50801 EConf
25*
SMTP (TCP)
Email system alarms from the IP Office to SMTP server.

37
Time (UDP)
Time requests from the IP Office to a Time Server (RFC868).

53
DNS (UDP)
Domain Name Service responses.

67
BOOTP/DHCP
DHCP server operation.

68
BOOTP/DHCP
DHCP client operation.

69
TFTP (UDP)
File requests to the IP Office.

69
TFTP (UDP)
File requests by the IP Office.

161*
SNMP (UDP)
From SNMP applications.

162*
SNMP Trap (UDP)
To addresses set in the IP Office configuration.

500
IKE (UDP)
Key exchange for IPSec protocol.

389*
LDAP (TCP)
Lightweight Directory Access Protocol.

520
RIP (UDP)
To and from the IP Office to other RIP devices. For RIP1 and RIP2 (RIP1 compatible) the destination address is a subnet broadcast, eg. 192.168.42.255. For RIP2 Multicast the destination address is 224.0.0.9.

520
RIP (UDP)

1701
L2TP (UDP)
Layer 2 tunneling protocol.

1718
H.323
H.323 Discovery

1719
H.323 RAS (UDP)
H.323 Status. VoIP device registering with the IP Office.

1720
H.323/H.245 (UDP)
H.323 Signalling. Data to a registered VoIP device.

2127
(UDP)
PC Wallboard to CCC Wallboard Server.

5060
SIP (UDP/TCP)
SIP Line Signalling

8080
HTTP (TCP)
Browser access to the Delta Server application.

8089
Enconf (UDP)
From the IP Office to the Conferencing Center Server Service. User access to the conference center is direct via HTTP sessions.

8888
HTTP (TCP)
Browser access to the IP Office ContactStore (VRL) application.

49152 to 53247*
RTP/RTCP (UDP)
Dynamically allocated ports used during VoIP calls for RTP and RTCP traffic. The port range can be adjusted through the System | Gatekeeper tab.

50791
IPO Voicemail (UDP)
To voicemail server address.

50793
IPO Solo Voicemail (UDP)
From IP Office TAPI PC with Wave drive user support.

50794
IPO Monitor (UDP)
From the IP Office Monitor application.

50795
IPO Voice Networking (UDP)
Small Community Network signalling (AVRIP) and BLF updates. Each system does a broadcast every 30 seconds. BLF updates are sent required up a maximum of every 5 seconds.

50796
IPO PCPartner (UDP)
From an IP Office application (for example Phone Manager or SoftConsole). Used to initiate a session between the IP Office and the application.

50797
IPO TAPI (UDP)
From an IP Office TAPI user PC.

50798
(UDP)
IP Office Manager and UpgradeWizard

50799
IPO BLF (UDP)
Broadcast to the IP Office LAN and the first 10 IP addresses registered from other subnets.

50800
IPO License Dongle (UDP)
To the License Server IP Address set in the IP Office configuration.

50801
EConf (UDP)
Conference Center Service to IP Office.

50802
Discovery (TCP)
IP Office discovery from Manager.

50804*
HTTP (TCP)
IP Office configuration settings access.

50805*
HTTPS (TCP)
TLS Secure "

50808*
HTTP (TCP)
IP Office system status access.

50812*
HTTP (TCP)
IP Office security settings access.

50813*
HTTPS (TCP)
TLS Secure "



Kevin Wing
ACA- Implement IP Office
Carousel Industries
 
Are you trying to open this up from outside your network?

Kevin Wing
ACA- Implement IP Office
Carousel Industries
 
make sure you don't use the default passwords for ANYTHING including the security passwords

Joe W.

FHandw., ACA, ACS

If you can't be good, be good at it!
 
We are only allow access from our IP Address.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top