IP Office LAN 1 IP Address

[miller3383]

I have an IP Office 500 v1 for which I do not know the LAN 1 IP address. Auto discovery is not finding it. Is there a way to check the IP address through phone programming?

 

[phoneguy610]

plug your laptop directly into lan 2... it should be 192.168.43.1

 

[miller3383]

...and if it is not 192.168.43.1?

 

[Telecomboy]

get wireshark on your laptop. it's a free app that allows you to sniff out what ip address's it's connected to.

 

[miller3383]

I am very new to IP Office! What I am hearing telecomboy say is that the system IP address cannot be determined through a phone?

 

[amriddle01]

If it's an IP Phone you can, how depends on model

http://www.ipoffice.tel

 

[hairlessupportmonkey]

a broadcast lookup on 255.255.255.255 should still show you the IPO in manager, you just can connect to it on differing subnets.

ACSS - SME
General Geek

 

[IPGuru]

it depends on the phone type
if you have ip phones then checking the network settings should help
the ip office will be the call serv
otherwise monitor the output of the DTE port on power-up

Computers are like Air conditioners:-
Both stop working when you open Windows

 

[amriddle01]

Or use Netscan.exe on the network and look for 00:e0:07 etc Mac's

http://www.ipoffice.tel