Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP Office Fax Support with Cisco SPA-112

Status
Not open for further replies.

esoderholm

IS-IT--Management
Nov 13, 2012
10
SE
In Reference to:thread940-1734958

Has anyone been able to configure the Cisco ATA (SPA-112) to work with IPO and a fax machine?

We got it running handling normal audio calls, but so far we haven't managed to send fax through it .
Any configuration tips would be most welcome!

BR
Emil

E Soderholm,

Aut inveniam viam aut faciam.
 
The fax needs to be adjusted to a baud rate of 9600(as low as possible). SIP is not designed as a zero delay audio connection which is what fax's and modems need, so it's always best effort only. If your fax can't be adjusted you will struggle to say the least :)

 
Did some digging in the SPA and found a flora of Fax settings. Set reinvite and used t38, works inbound but somehow outbound only works with #99 as a prefix. Anyone know where to set this permanently?

E Soderholm,

Aut inveniam viam aut faciam.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top