IP Office 9611VPN to Sonicwall

[jmperry]

Have a Customer that has a Sonicwall connected to a Layer 3 switch that is doing all their Routing and VLANs. The Data network is 192.168.1.0/24 and the IP Office is on 192.168.3.0/24.

The 9611 Tunnel builds when I set the Protected Net to 192.168.1.0/24 but the Phone goes into Discover with the IP Office IP 192.168.3.245 - If I set the Protected Net to 192.168.3.0/24 the Tunnel fails.

Has anyone had luck getting the 96XX VPN to work with Sonicwalls?

 

[tlpeter]

Do you have an ip route in the IPOffice to that network?


BAZINGA!

I'm not insane, my mother had me tested!

 

[jmperry]

Yes I have a Default Route set to go to the Layer 3 Switch.

 

[amriddle01]

Is it a routing switch? Some layer 3 switches just operate at layer 3 in that they support VLANS but they can't actually route between networks themselves



"No problem monkey socks

 

[jmperry]

The Customer is telling me Yes - So I can not be 100% certian

 

[amriddle01]

I doubt it, what do the PCs use as their default gateway?



"No problem monkey socks

 

[jmperry]

The VM server has the same GW as the IP Office which is the switch

 

[amriddle01]

Can it and the IPO ping outside the network?



"No problem monkey socks

 

[amriddle01]

Also how is the route configured?



"No problem monkey socks

 

[jmperry]

Yes - Their System Alarms into my so it has full access out

 

[jmperry]

I have the Default Route

0.0.0.0
0.0.0.0
192.168.3.1
LAN1

 

[amriddle01]

Hmmm, all looks good system side then, guess its back to the horror box/Sonicwall



"No problem monkey socks

 

[DavidCT]

On the Sonicwall, go to VoIP and disable h323 transformations.
Reboot Sonicwall.
Powercycle phone.