version 9.0.3.0 build 941
Trying to setup a simple call forwarding on a user with no handset assigned. This way we can forward calls there when no one is in the office or have them route automatically.
Ext 231 is no voicemail, forward unconditional, forward hunt group, intl calls, bna, etc.
If I dial 231 internally, it rings the cell phone.
If I setup a incoming call route for a specific DID, and send that to the ext 231 as "default value", it never rings the cell phone.
I've done forwards on ip office before, just not sure what im missing on this one.
Getting some items like this in monitor that just repeat over and over when I dial that phone number that should just be doing a forward to off-site phone#
"line id 5" is a pri card that is set to "out of service". We have lines 9-11 on analog that are used for in/outbound.
21:08:29 23033022mS CMTARGET: Problem with Line Id: 5 - preselected: 00000000, Unlicenced: 0, OperationalTest: 1, NewCallResourceCheck: -1
21:08:29 23033022mS CMARS: LINE with group ID: 0 HAS NO CHANNEL: 34 - ATTEMPT OTHER TARGETS
21:08:29 23033022mS CMLineTx: v=5
CMRestart
Line: type=Q931Line 5 Call: lid=0 id=-1 in=0
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ULaw
UUI type=User2User [.0.] [0x00 0x30 0x00 ]
Display [enu]
Locale: enu
21:08:29 23033022mS CMTARGET: Problem with Line Id: 5 - preselected: 00000000, Unlicenced: 0, OperationalTest: 1, NewCallResourceCheck: -1
21:08:29 23033023mS CMARS: No Alternate ARS Or User Priority lower than ARS Priority - Remain on the Current Form: Main
21:08:29 23033023mS CMARS: CMARSTargetingBusy
21:08:29 23033023mS CD: CALL: 9.2.1 BState=Idle Cut=1 Music=0.0 Aend="Line 9" (5.1) Bend="OffSiteForward(231)" [] (0.0) CalledNum=231 (OffSiteForward) CallingNum=[**removed**] () Internal=0 Time=14 AState=Dialled
21:08:29 23033025mS ISDNL2Tx: v=5 peb=5
0000 00 01 7f ...
21:08:29 23033025mS ISDNL1Tx: v=5 peb=5
0000 00 01 7f ...
21:08:32 23036475mS ISDNL1Tx: v=5 peb=5
0000 00 01 7f ...
21:08:33 23037625mS ISDNL3Evt: v=5 p1=5,p2=1001,p3=5,p4=0,s1=
21:08:35 23039016mS CMARS: Retarget existing BUSY targets - Num of Busy Targets: 1 - Current Form: Main
21:08:39 23043018mS CMTARGET: 9.2.1 18 Alog Trunk:9: TimerExpired cause=CMTCCoverageTimeout
21:08:39 23043018mS CMTARGET: 9.2.1 18 Alog Trunk:9: GetNoAnswerTimer:20
Trying to setup a simple call forwarding on a user with no handset assigned. This way we can forward calls there when no one is in the office or have them route automatically.
Ext 231 is no voicemail, forward unconditional, forward hunt group, intl calls, bna, etc.
If I dial 231 internally, it rings the cell phone.
If I setup a incoming call route for a specific DID, and send that to the ext 231 as "default value", it never rings the cell phone.
I've done forwards on ip office before, just not sure what im missing on this one.
Getting some items like this in monitor that just repeat over and over when I dial that phone number that should just be doing a forward to off-site phone#
"line id 5" is a pri card that is set to "out of service". We have lines 9-11 on analog that are used for in/outbound.
21:08:29 23033022mS CMTARGET: Problem with Line Id: 5 - preselected: 00000000, Unlicenced: 0, OperationalTest: 1, NewCallResourceCheck: -1
21:08:29 23033022mS CMARS: LINE with group ID: 0 HAS NO CHANNEL: 34 - ATTEMPT OTHER TARGETS
21:08:29 23033022mS CMLineTx: v=5
CMRestart
Line: type=Q931Line 5 Call: lid=0 id=-1 in=0
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ULaw
UUI type=User2User [.0.] [0x00 0x30 0x00 ]
Display [enu]
Locale: enu
21:08:29 23033022mS CMTARGET: Problem with Line Id: 5 - preselected: 00000000, Unlicenced: 0, OperationalTest: 1, NewCallResourceCheck: -1
21:08:29 23033023mS CMARS: No Alternate ARS Or User Priority lower than ARS Priority - Remain on the Current Form: Main
21:08:29 23033023mS CMARS: CMARSTargetingBusy
21:08:29 23033023mS CD: CALL: 9.2.1 BState=Idle Cut=1 Music=0.0 Aend="Line 9" (5.1) Bend="OffSiteForward(231)" [] (0.0) CalledNum=231 (OffSiteForward) CallingNum=[**removed**] () Internal=0 Time=14 AState=Dialled
21:08:29 23033025mS ISDNL2Tx: v=5 peb=5
0000 00 01 7f ...
21:08:29 23033025mS ISDNL1Tx: v=5 peb=5
0000 00 01 7f ...
21:08:32 23036475mS ISDNL1Tx: v=5 peb=5
0000 00 01 7f ...
21:08:33 23037625mS ISDNL3Evt: v=5 p1=5,p2=1001,p3=5,p4=0,s1=
21:08:35 23039016mS CMARS: Retarget existing BUSY targets - Num of Busy Targets: 1 - Current Form: Main
21:08:39 23043018mS CMTARGET: 9.2.1 18 Alog Trunk:9: TimerExpired cause=CMTCCoverageTimeout
21:08:39 23043018mS CMTARGET: 9.2.1 18 Alog Trunk:9: GetNoAnswerTimer:20