IP address on LDK100

[jezt]

Don't you just love BT? Back in Feb I asked them to reduce our ISDN lines from 4 to 2. So 6 months later and the day before a Bank Holiday, they have reduced them from 4 to 1, so I now only have 2 phones lines! Their mistake, but to rectify I need to sign a 5 year contact, pay £500 and sometime in the next 5 weeks they will add another ISDN line!!

My urgent problem is that I now need to program the switch to tell it we now only have lines 3&4.

Coupled with that I can't get my PC to connect to the switches IP address.

So double questions please folks.

1) how do I program the switch using then handset to set the channels?
2) how do I reset the switches IP address so my PC will talk to it.

Cheers, Jez.

 

[jmcevoy]

Hi Jez from the system attendant normally station 100 first port on system pgm 108 for ip settings and pgm 140-142 for line programming make sure that only line 3&4 are in line group 1 and the rest in line group 2 that will sort it for you .

 

[montyzummer]

to get into the handset from attendant dial 0 to find out which one (hopefully a 30 button) trans/pgm * # (1478* if password required) the to get into a program trans/pgm and pgm number in your case 108 / 140-142 after a change press hold/save ,

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[jmcevoy]

Hey Montyzummer the engineering bypass password is 147* but on higher than 3.6 versions this no longer works just an FYI

 

[montyzummer]

it does do you have ldk or ipecs

APSS (SME)
ACSS (SME)
ACIS (UC)