IP 5340 on SX-200 ICP firmware

[southwell]

SX-200 ICP v5.0.0.18

I have a 5340 that was apparently flashed with the lastest firmware from a 3300 or MCD. Everything works fine when I program it in the CDE but when it trys to flash while booting up it says cannot find main or something like that but eventually continues to load with the firmware already on the phone.

The only thing it does not work with the phone is the blue settings button so I cannot program a superkey which changes a lot of features that we need on the phone.

I read somewhere online that you can manually update the firmware by going to it's web interface but I do not know how to do that and trying to access the phone's IP address in a browser pulls up nothing 80 or on 443 through ssl.

Thanks,
Southwell

 

[southwell]

Just to update anyone who may have had a similar issue, I was able to resolve the problem.

The refurbished phone I received had a software load 4.0 and the other 5340's on the system had 01.04.00.14 I think. By updating the software revision on the ICP from 5.0.0.18 to the latest 5.0.2.7 the 5340 was able to find the main and re-flash the 5340 to the correct load of 01.06.03.08. Everything is working fine now.

Southwell