IP 500 crash

[mmori7]

My bad

Just try to upgrade ipo 500v1 6.1 to 7.0.23

there are something to do???

I think I need a new IPOffice

 

[mmori7]

Can I do something with the cf Card and the dte port?\

 

[Telecomboy]

Just downgrade it back to 6.1. You need an upgrade license to upgrade the software to r7.

 

[mmori7]

yeah, there was an license for software upgrade but just 6.0 to 6.1

shit, now I need to renicialize thru the rsr232 port, the IPO is dead.

 

[tlpeter]

How did you do that?
I have only once needed to DTE an IP500 and that was because i wrecked it on purpose.

If you do not know how it works then stay away from it.


BAZINGA!

I'm not insane, my mother had me tested!

 

[TomMills]

reset button not working?

http://www.twitter.com/tem1985

ACSS-SME
fo shizzle ma nizzle.

 

[mmori7]

Finnaly I was able to put it back to last version with DTE AT commands and Manager BOOTP with the right information.

the last config was with the mac add of WAN port, so to be sure I have the right MAC/port setting I did a ping for each of them an than a ARP -a.

At the begginning, the IPO 6.1 had the licence for software upgrade for 6.0 to 6.1 but not for 6.1 to 7.x

Anyway, It's my error.

Thanks