Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Internal Phone Forward

Status
Not open for further replies.

Altayan

Technical User
Mar 14, 2008
83
US
I have a phantom 500 setup to forward calls from one internal extension to another. The calls forward properly but they will not go to the end recipient's voicemail. Calling her directly does go to voicemail if she does not answer. Any suggestions on what I did wrong? Thanks in advance, you guys are great.

Here is the tnb for the 500 I setup:
REQ: prt
TYPE: tn
TYPE TNB
TN 132 0 2 6
DATE
PAGE
DES

DES 3191
TN 132 0 02 06 PHANTOM
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 3191 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
XLST 0
SCI 0
CLS UNR DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD TEND LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
PLEV 02
AACS NO
MLWU_LANG 0
FTR DCFW 4 3066
DATE 13 JUN 2008
 
Does the DN on the phantom 500 appear on any other phones?

If not, just add that DN to the extension DNs for the recipients voicemail box.

Regards,
Harry
"The legitimate powers of government extend to such acts only as are injurious to others. But it does me no injury for my neighbour to say there are twenty gods, or no god. It neither picks my pocket nor breaks my leg." --Thomas Jefferson
 
and you didn't do anything wrong, it go to the mailbox of the originally dialed number if unanswered, not the phantom dn, or destination dn.

Mato' Was'aka
 
Hmm, I added 3191 to the list of DN's that should leave vm for the 3066 in Callpilot, but it still just rings and rings. Perhaps I misunderstood the suggestion. Thanks for the rapid repsonses, always a pleasure.
 
May I ask why are you using a phantom to forward instead of just forwarding directly to the other phone?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
They wanted to do away with the physical phone set and I am running low on i2004 tn's.
 
If I try to enter sfa into cls it gives me erro sch0101 and won't give me a response for that error message. I am looking into the error message to see what else I need to do. Thanks.
 
Nevermind, found the problem, fat-fingered it around 8 times and didn't even see it. Too many weekends at work I think.
 
All the same, the addition of sfa did not correct the issue. On to the next idea.
 
How about outing the 500 and build it as an ACD that NCFW to the extensions?
 
Couldn't build it as an ACD because I am out. However, I discovered that I had missed the FND in the CLS. Changed it to FNA and fixed the problem, imagine that. LOL. Thanks again guys for the help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top