Internal call forward off site

[leatherneckdiver]

I'm trying to for an ext(6901) to a 1800XXXXXXX off site. I have tried both ACD DN and phantom DN and they both work if I forward to a local DN using ACOD 9 and LD DN using ACOD 8. 1800 is programmed as an SPN to go out the same RLB that the local calls go out. Any suggestions?

 

[leatherneckdiver]

I've programmed and tested both ways with AC1 and ACOD 7150 and the call still fails.

 

[Reusser]

LD 21
req: prt
type: net

post results

 

[leatherneckdiver]

TYPE NET_DATA
CUST 00
OPT RTD
AC1 INTL NPA SPN NXX LOC
AC2
FNP YES
ISDN YES
VPNI 0
PNI 0
PINX_DN
MBG 0
BSGC 65535
PFX1
PFX2
HLOC
LSC
RCNT 5
PSTN NO
TNDM 15
PCMC 15
SATD 1
OCLI NO
DITI NO
TRNX NO
EXTT NO
FTOP FRES
VNR NO
NIT 8
NAS_ATCL NO
NAS_ACTV NO
FOPT 14
CNTC
NATC
INTC

 

[Reusser]

What happens when you call x6901 - you get a fast busy or goes to intercept?

 

[leatherneckdiver]

Fast busy

 

[GHTROUT]

Route 50 is told to OABS 1 - that means it absorbs the first digit dialed. I'm not sure why you would want that, but it is probably the culprit.

--
Nortel Resources at GHTROUT.com
--