Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Intercom all members of DIG group???

Status
Not open for further replies.

Tiedo

IS-IT--Management
Jan 25, 2010
9
US
I read a few other threads discussing this same topic, however, I need a way to take multiple - 3902s and brodcast (aka. intercom) 1 one-way minimum or 2-way (preferred).

Key x DIG xxxx yyy R or V works great for individual members but how can I "page" through multiple sets?

Im open to enabling auto answer but want each phone to have its own DN for outbound calling.

I kicked around the idea of setting up a common MCR/SCR on each of these single line phones but again I want them each to be able to make outbound calls without using the same DN.

I can't change or upgrade sets, so it must be M3902.
Any ideas?
 
If you cannot go IP, then this is the workaround:

Move the prime DN and all other keys up one, then add a new non-DID number to KEY 00 of each phone.

Add CLA AAA to the 10 sets.

Build a Group Call list of those 10 non-DID KEY 0 DNs

Add a GRC key to the sets that must page

Press the GRC key, it rings all 10 sets, they all Auto-Answer and you speak through them.

How's that for a work-around

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--
 
That's fantastic!!! Thank you. Only negatives are:
- The system only supports 0-19 DNs per Group No..
- The GPC key is a dial down (hotline)...wish the system would prompt place caller to enter group number...I forsee several key assignments.

Thanks again as this is exactly what I was needing.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top