Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installing Deplist on a stand-alone NRS

Status
Not open for further replies.

Skaret

Technical User
Jan 17, 2004
244
NO
When installing deplist on a stand-alone NRS (CPPM) I copy the deplist to the CF-card and install deplist from pdt on NRS.

But, is it possible to install deplist on a stand alone NRS remote without having CF-card with deplist installed into NRS (CPPM)?
 
You can ftp the file to the hard drive, then run the mdp refresh command referencing the path to the zip file.

 
How do I ftp the file to hard drive? I tried to ftp from my computer to the IP-adress og NRS, loggin in with pdt2, but it seems to be logged in as guest.....
 
Hi,
from my understanding it´s not needed to install a deplist on the NRS. The NRS is a Part of the Sig Server, and you install the newest deplist in the WEB Interface of the Signalling Server. But is also possible to patch the Sig Server over the Command Line.
 
Swenbob, it's a stand alone NRS (Alternate) witout Sigaling Server functionality.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top