Our company is expanding, and needs to install an additional 0x16 module (we already have one, and are adding a second) into our 0x32 MICS 4.1 system. I have done enough research to know that we have a 6-port fiber expansion card with 5 ports availible, so that part won't be an issue.
I have telco experience working with a Siemens PBX with installing cards, ports, cabling, cross-connecting, and the like.
How difficult is it to install a 0x16 module? Is it as simple as physically mountng the unit, connecting the fiber, connecting & terminating the 25 pair cable, and some minimal system programming? I have done simple programming on this system (moving DN's, changing line ringing options, etc), but nothing of this magnitude.
If it is relatively simple, where can I go to get installation instructions for the programming of this module?
Thanks, as always, for your valued input.
Jon
I have telco experience working with a Siemens PBX with installing cards, ports, cabling, cross-connecting, and the like.
How difficult is it to install a 0x16 module? Is it as simple as physically mountng the unit, connecting the fiber, connecting & terminating the 25 pair cable, and some minimal system programming? I have done simple programming on this system (moving DN's, changing line ringing options, etc), but nothing of this magnitude.
If it is relatively simple, where can I go to get installation instructions for the programming of this module?
Thanks, as always, for your valued input.
Jon