Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installed PRI and need ported number to ring ATTCON

Status
Not open for further replies.

MercuryComm

Vendor
Aug 4, 2006
150
US
One of my techs just cut over 2 new PRI's on a 2400IPX. The main number used to be a ground start trunk and now the PRI provider is sending us the last 4 digits of the number or 2000. Right now anytime the main number is called the caller lands on the operator button. We have confirmed that the provider is in fact sending us 2000. How do we get this 2000 number to ring the console on a button other than the operator button? We have done this before but can't remember what we did to make it work....

Thanks!!
 
Take a look at the ALDN command. This should do what you need.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top