Installed PRI and need ported number to ring ATTCON

[MercuryComm]

One of my techs just cut over 2 new PRI's on a 2400IPX. The main number used to be a ground start trunk and now the PRI provider is sending us the last 4 digits of the number or 2000. Right now anytime the main number is called the caller lands on the operator button. We have confirmed that the provider is in fact sending us 2000. How do we get this 2000 number to ring the console on a button other than the operator button? We have done this before but can't remember what we did to make it work....

Thanks!!

 

[VDG]

Take a look at the ALDN command. This should do what you need.