Individual Account Codes on DECT

[pea123]

Hie.

Using dect phones 5603 on IPBS2 with 3300 MCD 6.0. I can either give the 5603 full accesss or full barring.When fully barred I would like to use the Individual Account Codes on the 3300 and it Account Codec FAC. Is this achievable and how.

2, I would also like to tie together a 5603 and a 5312 such that If the 5312 is called, it rings together with the 5603 but when the 5603 is called it rings alone. Need helo on how to do this as well.

 

[bobcheese]

2. Is simple, create a personal ring group with the 5312 as the pilot and the 5603 as a member.

1. Never tried to use forced account code on DECT handset but can't see why it wouldn't work. Just follow help guide for 'forced account code'

 

[pea123]

1. I have managed with the PRG for both phones to ring.
2. Cant get the Forced Account Code form and need more advise on this.

 

[bobcheese]

1. Independent Account Code Definition - Create account codes and define the COS and COR that will be applied when this code is entered.
2. Copy the existing COS of 5603 to a new unused COS.
3. Enable the 'forced verified account code' COS option in the new COS
4. Apply this COS to the 5603 that you wish to use account codes on
5. To make a call get dial tone on 5603, enter account code, dial number