Incoming calls through a SIP frame

[RRod]

Dear,
Could you explain me how the IPO 500 handles incoming calls using a SIP frame?
I have a header 34567000 to 34567099, meaning a total of 100 incoming direct dial numbers. I configured a SIP User Credential Name: 34567000 / Auth Name: 34567000 / Contact: 34567000 / Registration Required: disable. And then I went to the tab Local SIP URI URI: Use Credential User Name / Contact: Use Credential User Name / Display Name: Use Credential User Name / PAI: None / Registration: 34567000 / Incomming Group: 6 / Outgoing Group: 6 / Max Calls per Channel: 10.

This configuration does working OK but I have a total of 100 incoming direct dial number and the system allow configure a total of 30 SIP Credential.

How I can configure this for that the system capable of receiving a total of 100 incoming direct dial number?

Thanks for your help

Regards

 

[tlpeter]

You should have one registration for all the numbers.

BAZINGA!

I'm not insane, my mother had me tested!

 

[RRod]

Thanks for your answer, but Could you tell me about how I can configured this?

Regards

 

[RRod]

Please, Could you tell me about how I can configured this?

regards

 

[tlpeter]

If i need to explain this then i guess you should get somebody to do this for you.
SIP trunks are not plug and play but it needs tweaking very often.
There is no real way to go.

BAZINGA!

I'm not insane, my mother had me tested!