Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Incoming calls not showing in the system

Status
Not open for further replies.

Adillo303

Technical User
Mar 29, 2010
49
US
Avaya IP Office 500 -
System has been operating for years, no problems.

Today, I added an extension. I must have inadvertently done something else.

I hear ring when I dial in. Nothing is displayed on any of the phones.

They can make outgoing calls.

All Ines are assigned to calling group 1

Calling group 1 directs calls to the auto attendant.

I am wondering if I might have deleted the time profile.

Any help would be appreciated.

Thank You

Andy
 
Simplist thing to do would be to load an older config to get back up and running then rebuild the extension.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
 
Can you dial *17?

Did you made a system status trace to see what is happening?

Did you check sys monitor?

Did you do anything to analyse the issue?
 
How did you mess up so badly by adding an extension? Some training may be in order.
Do as budbyrd did...to to file, offline, open config, open the latest config in manager, then file offline, send config, and put your stuff back the way it was.
Unless you've made more changes since then....

-Austin
I used to be an ACE. Now I'm just an Arse.
qrcode.png
 
I want to summarize and say thank you.

The final problem is as was suggested, broken wire feeding the lead number to the switch.

The suggestions here are / were invaluable and I learned a ton.

Thank you all for your help

Andy
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top