Inbound CLID add 9 to call log

[Trevor Stuart]

I want to make it so our Call Log has the number with 9 already in front, so we don't have to edit the number to call someone back.
I created a new table, Table 1 is the one I created. Table 0 already existed, but doesn't appear to be applied to any routes.
Also added table 1 to Route 6, as I THINK this is the only DID route.

Looking at the below data, can anyone see what I've missed? Sorry it's so much data, wasn't sure if someone would see something in the other tables, or routes...
Tables:
>ld 21
REQ: prt
TYPE: ftr
TYPE FTR_DATA
CUST 0

TYPE FTR_DATA
CUST 00
TBL
**DAPC**PREFIX TABLE NO: 00 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 00 0
PRIV*
E163* 00 0
TELX*
X121*
NATL*

**DAPC**PREFIX TABLE NO: 01 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 9
PRIV*
E163*
TELX*
X121*
NATL*

OPT AHA BIND BIXA BLA CFF CFRA
COX CPA CTA DBD DNX DSX
HTU HVD XBL IC1 IDP XLF
IHD XTG FKA LOD LRA MCI
MWUD PVCA REA RND
RTR RTD ROX SBD SYA
TTAD VOBA CWRD HLPD HRLD
CXOD
DGRP 10
IRNG NO
PKND 2
DNDL NO
SPRE 620
PREO 0
BPSS NO
SRCD 8375
EEST YES
DTMF YES
EESD NO
TTBL 0
MUS NO
ALDN
RECD NO
PORT 0
STCB NO
MCDC NO
NAUT NO
IDEF NO
MTAR NO
LEND NO
MSCD NO
CPCI NO
CONF_DSP
CNFFIELD NO
CNF_NAME CONF
INTFIELD NO
INT_NAME I
EXTFIELD NO
EXT_NAME E
BSFE NO
ASPCT 010
FXS NO
DFLT_LANG ENG
STS_MSG
MSG01 Please leave message
MSG02 Back to work
MSG03 In a meeting
MSG04 On a conference call
MSG05 At lunch
MSG06 Busy call
MSG07 Out of the office today
MSG08 On a business trip
MSG09 Project deadline today
MSG10 Will reply after
VO_ALO NO
PCA OFF
TPDN
BFS_CFW YES
VO_CUR_ZONE_ZDM NO
VO_CUR_ZONE_TD NO
********************************************************************
Routes
prt
TYPE: rdb
CUST 0
ROUT
ACOD

TYPE RDB
CUST 00
DMOD
ROUT 0
DES
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC D100
SBN NO
PNI 00000
NCNA YES
NCRD YES
ISAR YES
RTN 10
MIN 0
MAX 15
NCOS 0
IEC ???
CPUB OFF
DAPC NO
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DCDR NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 7100
TCPP NO
PII NO
TARG 01
CLEN 1
BILN NO
OABS
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
OOD 3
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
NBS 2048
NBL 4096
TFD 0


PAGE 002

LEXT 100
DRNG NO
CDR NO
MUS NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 1
DES
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ACO
AUTO NO
ICOG ICT
STEP
ACOD 7101
TARG
CLEN 1
BILN NO
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
OOD 3
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
TFD 0
LEXT 100
SST 3 0
NEDC ETH


PAGE 003

FEDC ETH
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DRNG NO
CDR YES
INC YES
LAST NO
QREC NO
OAL YES
AIA YES
OAN YES
OPD NO
CDRX NO
NATL NO
TDG
MUS NO
MR NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 2
DES
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ACO
AUTO NO
ICOG OGT
RANX NO
SRCH LIN
STEP
ACOD 7102


PAGE 004

CPP NO
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
OOD 3
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
TFD 0
LEXT 100
SST 3 0
NEDC ETH
FEDC ETH
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
CDR YES
INC YES
LAST NO
QREC NO
OAL YES
AIA YES
OAN YES
OPD NO
CDRX NO
NATL NO
TDG
MUS NO
MR NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO


PAGE 005


TYPE RDB
CUST 00
DMOD
ROUT 3
DES
TKTP TIE
M911P NO
ESN NO
CNVT NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ATT
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 7103
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
STYP SDAT
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN YES
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
MUS NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0


PAGE 006

FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 4
DES
TKTP TIE
M911P NO
ESN NO
CNVT NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ATT
AUTO NO
DNIS NO
ICOG ICT
STEP
ACOD 7104
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
STYP SDAT
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO


PAGE 007

DLTN YES
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
MUS NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 5
DES
TKTP TIE
M911P NO
ESN NO
CNVT NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC D100
SBN NO
PNI 00000
NCNA YES
NCRD YES
CTYP UKWN
INAC NO
ISAR YES
RTN 10
FACY NO
SID 5
MIN 0
MAX 4
NCOS 0
CLS CTD
TGAR 1
CPUB OFF
DAPC NO


PAGE 008

BCOT 0
DSEL VOD
PTYP PRI
AUTO YES
DNIS NO
DCDR NO
IANI NO
AUDN 233
ICOG ICT
STEP
ACOD 7105
PII NO
TARG 01
CLEN 1
BILN NO
OABS
INST
ANTK
SIGO STD
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DRNG NO
CDR NO
MUS NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
ATAN NO
PLEV 2
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 6
DES DID
TKTP DID
M911_ANI NO
M911_TONE NO
NPID_TBL_NUM 0
SAT NO


PAGE 009

RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC D100
SBN NO
PNI 00000
NCNA YES
NCRD YES
ISAR YES
RTN 10
MIN 0
MAX 15
NCOS 0
CPUB OFF
DAPC YES
TBL 1
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG ICT
STEP
ACOD 7106
PII NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC YES
DCNO 1 *
NDNO 1
DEXT NO
DNAM NO
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
NBS 2048
NBL 4096
DRNG NO
CDR NO
MUS NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0


PAGE 010

FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 10
DES
TKTP ISA
NPID_TBL_NUM 0
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC D100
SBN NO
PNI 00000
SVRT 0
5
6
NCRD YES
NSF YES
COTR 6
WATR
CHTY BCH
DCDR NO
ICOG IAO
SRCH LIN
TRMB NO
ACOD 7110
TCPP NO
TARG
CLEN 1
BILN NO
OABS
ICIS NO
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048
NBL 4096
DRNG NO

TYPE RDB


PAGE 011

CUST 00
DMOD
ROUT 31
DES PVRS
TKTP COT
NPID_TBL_NUM 0
PRIV YES
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ACO
AUTO NO
ICOG IAO
RANX NO
TRMB YES
STEP
CPP NO
TARG 01
CLEN 1
BILN NO
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
OOD 3
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
TFD 0
LEXT 100
SST 3 0
NEDC ETH
FEDC ORG
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DRNG NO
CDR NO
MUS NO
MR NO
MANO NO
EQAR NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0


PAGE 012

ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 40
DES
TKTP MUS
NPID_TBL_NUM 0
VTRK NO
NODE
ICOG OGT
SRCH LIN
STEP
BDCT NO
ACOD 7140
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
SST 5 0
NEDC ETH
FEDC ETH
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
CDR NO
MUS NO
TTBL 0
OHTD NO
ALRM NO
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 41
DES
TKTP AWR
NPID_TBL_NUM 0
VTRK NO
NODE
RTYP AUD
GRD IDLE
ACOD 7141
TARG
CDR NO
MUS NO
TTBL 0
OHTD NO
ALRM NO
SGRP 0


PAGE 013

ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 42
DES
TKTP RAN
NPID_TBL_NUM 0
VTRK NO
NODE
RTYP DGT
GRD IDLE
REP 1
POST DIS
RANH
STRT DDL
WAIT RGB
BDCT NO
ASUP YES
ACOD 7142
TARG
CDR NO
MUS NO
TTBL 0
OHTD NO
ALRM NO
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 43
DES
TKTP RAN
NPID_TBL_NUM 0
VTRK NO
NODE
RTYP AUD
GRD IDLE
REP 1
POST DIS
RANH
STRT DDL
WAIT RGB
BDCT NO
ASUP YES
ACOD 7143
TARG
CDR NO
MUS NO
TTBL 0
OHTD NO
ALRM NO
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD


PAGE 014

ROUT 44
DES PAG-Z1
TKTP PAG
NPID_TBL_NUM 0
NACC PGNR
ESN NO
VTRK NO
NODE
ICOG OGT
SRCH LIN
STEP
ACOD 7144
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 30
SST 5 0
NEDC ETH
FEDC ETH
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
CDR NO
MUS NO
TTBL 0
OHTD NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 45
DES PAG-Z2
TKTP PAG
NPID_TBL_NUM 0
NACC PGNR
ESN NO
VTRK NO
NODE
ICOG OGT
SRCH LIN
STEP
ACOD 7145
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944


PAGE 015

NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 30
SST 5 0
NEDC ETH
FEDC ORG
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
CDR NO
MUS NO
TTBL 0
OHTD NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 46
DES PAG-Z3
TKTP PAG
NPID_TBL_NUM 0
NACC PGNR
ESN NO
VTRK NO
NODE
ICOG OGT
SRCH LIN
STEP
ACOD 7146
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ETH
FEDC ORG
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
CDR NO
MUS NO
TTBL 0
OHTD NO
ALRM NO


PAGE 016

ART 0
SGRP 0
ARDN NO
AACR NO

 

[StanleySteamer]

Guessing that your PRI is D100 which unfortunately doesn't support DAPC feature.
LD 22
REQ prt
TYPE adan dch

 

[Firebird Scrambler]

In the UK, we got this feature to work by creating a new DAPC table and having "9" in front of e.g. "0" and "00" etc.


FTR_DATA
**DAPC**PREFIX TABLE NO: 00 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 00 0
PRIV*
E163* 00 0
TELX*
X121*
NATL*

**DAPC**PREFIX TABLE NO: 01 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 900 90
PRIV*
E163* 900 90
TELX*
X121*
NATL*

OPT ABDD AHA EBIN BIXA BLA BOHA CHDD CFO CFRA
COP CPA CTA DBA DNCA DNX DSX DRE
DSTD FACD HTU HVA XBL IC1 IDP XLF
IHA XTG FKA LOD LRA MCI MCTD CUI
MWUD NCA PCMD PSD PVCA RECA REA RNA
ROR RTD ROX SBD SDDE SIAD SLD SYA
THPD TTAD VOBA CWRD HLPD HRLD
CXOD BWTD
DGRP 10
IRNG YES
PKND 2
DNDL NO
SPRE 12
PREO 0
BPSS NO
SRCD 1234
EEST YES
DTMF NO
EESD NO
TTBL 0
MUS NO
HCC NO
ALDN
RECD NO
PORT 0
TFDR NO
RPA NO
MCDC NO
NAUT NO
IDEF YES
MTAR NO
LEND NO
MSCD NO
CONF_DSP
CNFFIELD NO
CNF_NAME CONF
INTFIELD NO
INT_NAME I
EXTFIELD NO
EXT_NAME E
BSFE NO
ASPCT 010
DFLT_LANG ENG
STS_MSG
MSG01 Please leave message
MSG02 Back to work
MSG03 In a meeting
MSG04 On a conference call
MSG05 At lunch
MSG06 Busy call
MSG07 Out of the office today
MSG08 On a business trip
MSG09 Project deadline today
MSG10 Will reply after

Another method that could work is using Pre Translation, but this depends on your internal numbering range and the leading digit dialled. In the UK, our numbers start off with a "0" and it's possible to assign the Attendant with a different number other than "0" and then use Pre Translation on all phones so that when redial is pressed that "0" in the assigned XLST area dials e.g. "90" and any other number is routed out.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[Trevor Stuart]

Looks like it is a d100. LD 22 is below.
I don't think the 0 would help us here in Canada. As telcom doesn't send 0's for our numbers...
I will see if the XLST can be programmed to dial 9 with pre-translation... Is there another form post where someone has done this that I could reference? Since we don't want to add a 0, the fact that our attendant is already 0 should not be affected, at least I don't think it will.


>ld 22
PT2000

REQ prt
TYPE adan dch

ADAN DCH 6
CTYP MSDL
CARD 06
PORT 1
DES PRIMARY
USR PRI
DCHL 6
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC D100
SIDE USR
CNEG 1
RLS ID 36
RCAP ND2 NCT
MBGA NO
OVLR NO
OVLS NO
PRI INTERFACE ID
07 2
T200 3
T203 10
N200 3
N201 260
K 7

 

[bignose21]

If you are referring to RT6 where you have enabled DAPC table 1 where you are adding 9 to E164 INTL calls only I would have thought in Canada you would want something along the lines of:

**DAPC**PREFIX TABLE NO: 01 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 9011 91
PRIV*
E163* 9011 91
TELX*
X121*
NATL*

Also depending upon the release of software you are on there is other options in latest release, Numzone DAPC and Flexible CLID manipulation (but don't think this is available in D100)

 

[Trevor Stuart]

Changed table 01 to the following
**DAPC**PREFIX TABLE NO: 01 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 9 9011 91
PRIV*
E163* 9 9011 91
TELX*
X121*
NATL*

basically 9 - Unknown, 9011 - Intl, 91 - Natl

When I call It's still not apending 9 to my number.
Is this because it's a D100? If so is there another way to do this?
Should I also put 9 under Locl, or does that mean local as in local dn?
Based on what you see from my route table above, is RT6 the only one that I need to apply this to? Or could there by others?

 

[Firebird Scrambler]

Did you change Route 0 to have DAPC = YES and then table 1 selected as your original thread shows Route 0 to have DAPC = NO.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[bignose21]

To be fair how would we have the first iota which route your calls come in on. You can enable dch messaging in ld 96 then if it is one of the d100 routes you should see the inbound setup message if you posted that we would have a starting point. Also what release is the switch on?

 

[Trevor Stuart]

FirebirdScrambler - I did not change route 0, as I didn't think it was an incomming route. should Route 0 have DAPC set to yes, in addition to the DID route?

I wasn't sure if you could tell just by looking at the RDB's or not... I enabled the dch messaging and placed a call.
this tells me it is E164 NATL that needs the 9.
Either the issue is DAPC is not applied to all the routes necessary, or because it's a D100 this doesn't work?

DCH 6 IMSG SETUP REF 000097D7 CH 6 2 TOD 14:33:08
PROGRESS: CALL IS NOT END TO END ISDN
CALLING #:7801231234 NUM PLAN: E164/NATIONAL / NPA
CALLED #:1231234 NUM PLAN: E164/SUBSCRIBER (NXX)/LOCL

System is
CALL SERVER/MAIN CAB
VERSION 2121

System type is - PBX 11C
Nortel PBX 11C

RELEASE 5
ISSUE 50 J +

 

[bignose21]

Print the tnb of 6 2 and confirm what route it's in

 

[Firebird Scrambler]

Go to

http://ghtrout.net/conversionutility.html

where I keep my guide and follow the Networking instructions so that you have a list on what outgoing codes use when dialling out as you will probably have different RLI's for different codes.

Although your DCH is "6", I don't know if route 6 is being used. I can see that you have set it correctly against route 6 for DAPC = YES and TABLE = 1.

It could be that you are using another route for incoming against the one for outgoing and that the DAPC will need to be set against the incoming trunks.

Some customers have requirements whereby only certain trunks / routes are used for incoming from one provider and using a different provider for outgoing.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[Trevor Stuart]

bignose21 - Did the print TNB - looks like I'm Route 10. What does the 2 mean beside the 10?

​

I can't add DPAC to route 10 though, it's not an available option.

Firebird - I do have your utility. I've grabed the network info. There are quite a few AC1's, and I see MOST RLI's are 1 or 2, there are a few 3, 4, and 5 though. ALL are route 0.

REQ: prt
TYPE: tnb
TN 6 2
DATE
PAGE
DES

DES
TN 006 02
TYPE ISA
CUST 0
TRK PRI
PDCA 1
PCML MU
RTMB 10 2
B-CHANNEL SIGNALING
TGAR 1
STRI/STRO OWK OWK
AST NO
IAPG 0
CLS UNR DTN CND ECD WTA LPR THFD HKD SPCD
P10 VNL
TKID
AACR NO
DATE NO DATE

 

[Firebird Scrambler]

OK. We know that Route "0" is being used on your outgoing calls. We also know that your DCH is "6".

DAPC can only be set against supported digital trunks and not against any COT ones.
If your phones digital display hasn't changed with showing a e.g. "9" in front on external incoming calls then I would think that you will have problems getting it to work.

As you said, Route 10 doesn't give you the DAPC prompt.


Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[bignose21]

So its in Route 10 which is also D100 can you enable DAPC table 1 against that route? But I think it would need to be trunk type DID instead of ISA to do that.

 

[Trevor Stuart]

No I cannot enable DAPC on Route 10 at all.
Can I just change between ISA and DID? Or am I asking for problems changing trunk types?

 

[StanleySteamer]

Route 10 is the master ISA route for service routes 0, 5 and 6. The ISA master route contains the physical channels that are shared by the different service routes (SVRT).
Route 0 is an incoming service route, probably for the main number of your site. Route 5 is your outgoing route.
Route 6 is your incoming DID route. Likely your test call came in on route 6 but used a channel that was assigned in the master route 10.

You can try turning DAPC on for route 0 to be but these are all D100 so I doubt it will work.

 

[bignose21]

There was a group of patches specifically written for release 4.5 and 5.0 that provided all the features that you get in numzones (DAPC is part of that) but they were specific for a customer we had and they would need reworking to 5.5 for you. If you you want I can try and dig out the details but would not expect that Avaya would work on software at that release.

 

[Trevor Stuart]

Bignose,
I'd like to see the instructions if you can find them.

 

[Trevor Stuart]

Is using DMI's an option to get 9 added to the call log?
Right now there are no DMI's configured in this system.
If I built one with
DEL 0
INST 9
CTYP NCHG
Would this add the 9 to the call log?

 

[bignose21]

DMI is to alter the called number not the calling number.

Like I say these were customer specific patches and last release was at release 5.0
MPLR24408 - Display correct CLID for E.164 and local calls and provide zone based DAPC feature.

Zone Based DAPC:
The current configuration for route based DAPC must be removed for zone based DAPC to work properly. For each zone that requires DAPC feature, the AC1, INTC and NATC are configured in the ZDES string in LD 117 so that the required Dial Access Prefix can be added to the CLID for sets that belong to this zone. The command is described as follows:

In LD 117
chg zdes <zone> “zpre <site prefix> zcc <country code> zac1<site AC1> znatc <national access code> zintc <international access code>”

For example: Numzone prefix 100 (NPA=713, NXX=234); zone 1; country code = 1; site ac1 = 9; natc = 1; intc = 011:

chg zdes 1 “zpre 100 zcc 1 zac1 9 znatc 1 zintc 011”

The zone based DAPC patch will add the appropriate dial access prefix to the CLID for the following call types:

• Add 9 to 7132341234 (local call) so that 97132341234 is stored for redialing.
• Add 91 to 6131234567 (national call) so that 916131234567 is stored for redialing.
• Add 9011 to 3120123456 (international call) so that 90113120123456 is stored for redialing.