Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inbound CALLER-ID / EC500

Status
Not open for further replies.

G3rtech

Technical User
Mar 7, 2003
313
US
Can someone please tell me what setting to change to send the inbound caller info to the mobile phone. I have confirmed that the caller-id is correct on my desk station but not being handed off to my mobile.

S8730s CM 5.2.0
Thanks,

Gary L. Smith
Telephone Systems Engineer
The University of Mississippi
Telecommunications Department
 
Do you have Verizon as your mobile phone company..? What I've seen in the past with Verizon is, when you call from your desk phone to cell phone the ANI passes, but when the call goes through EC500 it will not pass the ANI.
 
This is usually a restriction of the outbound provider. I have had no luck getting Verizon to allow me to present a caller ID that is not a Verizon-number-assigned-to-my-trunk-group.
 
I have AT&T for my local PRIs and AT&T LD which Quest handles.

Gary L. Smith
Telephone Systems Engineer
The University of Mississippi
Telecommunications Department
 
Can you post an trace of the EC500 call to see where the caller-id is being stripped?
 
Do you know what requirements your carrier has for passing ANI information.

If you do, you can use the
Code:
change tandem-calling-party-num
command to manipulate what you are presenting to the line.

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
 
11:14:23 Calling party trunk-group 33 member 12 cid 0x1123
11:14:23 Calling Number & Name 6622364084 NO-CPName
11:14:23 dial 3314
11:14:23 ring station 3314 cid 0x1123
11:14:23 G711MU ss:eek:ff ps:20
rgn:2 [130.74.94.40]:12506
rgn:2 [130.74.130.242]:9436
11:14:23 dial 9801 route:HNPA|ARS
11:14:23 term trunk-group 33 cid 0x1124
11:14:23 dial 98013456 route:HNPA|ARS
11:14:23 route-pattern 2 preference 1 cid 0x1124
11:14:23 seize trunk-group 33 member 75 cid 0x1124
11:14:23 Setup digits 8013456 ((MY MOBILE))
11:14:23 Calling Number & Name 6622364084 NO-CPName
11:14:23 Proceed trunk-group 33 member 75 cid 0x1124
11:14:25 Alert trunk-group 33 member 75 cid 0x1124
11:14:36 idle trunk-group 33 member 12 cid 0x1123
11:14:36 idle trunk-group 33 cid 0x1124

All I get is my listed directory number 662-915-7211

Gary L. Smith
Telephone Systems Engineer
The University of Mississippi
Telecommunications Department
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top