Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

In a pickle, a little help please. Cell.find not working corrctly 1

Status
Not open for further replies.
Askalon

Askalon

Technical User
Nov 27, 2006
20
US
I have a mcro that converts a spreadsheet into organized data (the way they want it). One of the functions is that it has to figure up the wage per an hour based on different factors. Hours, overtime, milage (input via msg box), and base pay(hard coded in macro). It works great! However, now I have to figure up how much to charge each location based on the number of hours spent there, the code used (ie job function) and the persons wage (which we just figured out above). If I do not add in milage(just hit ok), it will find the location and code fine on the worksheet and place the correct amount in the cell. If I input any milage, it will not find the location correctly and inputs in to a different Cell. I have triple checked the code and can see no place of how this should effect the output. Even the variant is correct to show the value, but the cell.find messes up.

I have the locations setup as general on the sheet as some of them start with a 0 and excel kept removing it and then none of the finds worked. So far this has been working good till this.


of intrest: location 025 will set in location 620 and location 185 will set in 261.

The spreadsheet can be found at :
Code: 
Sub Newpayment()
Dim emp1hours
Dim emp2hours
Dim emp3hours
Dim emp4hours
Dim emp5hours
Dim emp6hours
Dim emp7hours
Dim emp8hours

Dim emp1othours
Dim emp2othours
Dim emp3othours
Dim emp4othours
Dim emp5othours
Dim emp6othours
Dim emp7othours
Dim emp8othours

Dim emp1milage
Dim emp2milage
Dim emp3milage
Dim emp4milage
Dim emp5milage
Dim emp6milage
Dim emp7milage
Dim emp8milage

Dim emp1rate
Dim emp2rate
Dim emp3rate
Dim emp4rate
Dim emp5rate
Dim emp6rate
Dim emp7rate
Dim emp8rate

Dim property
Dim propnumber
Dim codenumber
Dim codehours
Dim name

Application.ScreenUpdating = False
Sheets("finish").Select

Range("AQ:AQ").Select
 Selection.NumberFormat = "$#,##0.00"
 Range("a1").Select


emp1hours = 160
emp1othours = 17.25
emp2hours = 100.75
emp2othours = 0
emp3hours = 104.25
emp3othours = 0
emp4hours = 142
emp4othours = .5
emp5hours = 150
emp5othours = 4.75
emp6hours = 3.25
emp6othours = 0
emp7hours = 104.75
emp7othours = 0
emp8hours = 122
emp8othours = 0

emp1tothours = emp1hours + emp1othours
emp2tothours = emp2hours + emp2othours
emp3tothours = emp3hours + emp3othours
emp4tothours = emp4hours + emp4othours
emp5tothours = emp5hours + emp5othours
emp6tothours = emp6hours + emp6othours
emp7tothours = emp7hours + emp7othours
emp8tothours = emp8hours + emp8othours



emp1milage = InputBox("Please enter total mileage for Employee 1 this month.", "Employee 1’s Milage")
If emp1milage = "" Then
Emp1milage = "0"
End If

Emp2milage = InputBox("Please enter total mileage for Employee 2 this month.", "Employee 2’s Milage")
If emp2milage = "" Then
Emp2milage = "0"
End If

Emp3milage = InputBox("Please enter total mileage for Employee 3 this month.", "Employee 3’s Milage")
If emp3milage = "" Then
Emp3milage = "0"
End If

Emp4milage = InputBox("Please enter total mileage for Employee 4 this month.", "Employee 4’s Milage")
If emp4milage = "" Then
Emp4milage = "0"
End If

Emp5milage = InputBox("Please enter total mileage for Employee 5 this month.", "Employee 5’s Milage")
If emp5milage = "" Then
Emp5milage = "0"
End If

Emp6milage = InputBox("Please enter total mileage for Employee 6 this month.", "Employee 6’s Milage")
If emp6milage = "" Then
Emp6milage = "0"
End If

Emp7milage = InputBox("Please enter total mileage for Employee 7 this month.", "Employee 7’s Milage")
If emp7milage = "" Then
Emp7milage = "0"
End If

Emp8milage = InputBox("Please enter total mileage for Employee 8 this month.", "Employee 8’s Milage")
If emp8milage = "" Then
Emp8milage = "0"
End If

Range("AQ8").Value = Application.WorksheetFunction.Sum((emp1milage + (1.75 * ((emp1hours * 16.06) + (emp1othours * (24.09))))) / emp1tothours)

Range("AQ9").Value = Application.WorksheetFunction.Sum((emp2rmilage + (1.75 * ((emp2hours * 16.06) + (emp2othours * 24.09)))) / emp4tothours)

Range("AQ10").Value = Application.WorksheetFunction.Sum((emp3milage + (1.75 * ((emp3hours * 12.71) + (emp3othours * 19.06)))) / emp3tothours)

Range("AQ11").Value = Application.WorksheetFunction.Sum((emp4milage + (1.75 * ((emp4hours * 12.25) + (emp4othours * 18.37)))) / emp4tothours)

Range("AQ12").Value = Application.WorksheetFunction.Sum((emp5milage + (1.75 * ((emp5hours * 14.3) + (emp5othours * 21.45)))) / emp5tothours)

Range("AQ13").Value = Application.WorksheetFunction.Sum((emp6milage + (1.75 * ((emp6hours * 8.5) + (emp6othours * 12.75)))) / emp6tothours)

Range("AQ14").Value = Application.WorksheetFunction.Sum((emp7milage + (1.75 * ((emp7hours * 11) + (emp7othours * 16.5)))) / emp7tothours)

Range("AQ15").Value = Application.WorksheetFunction.Sum((emp8milage + (1.75 * ((emp8hours * 10.6) + (emp8othours * 15.9)))) / emp8tothours)



emp1rate = Range("AQ8").Value
emp2rate = Range("AQ9").Value
emp3rate = Range("AQ10").Value
emp4rate = Range("AQ11").Value
emp5rate = Range("AQ12").Value
emp6rate = Range("AQ13").Value
emp7rate = Range("AQ14").Value
emp8rate = Range("AQ15").Value




Sheets.add Type:="Worksheet"
With ActiveSheet
.name = "Property"
End With
Range("A:A").Select
Selection.NumberFormat = "@"
Range("A2").Select
    ActiveCell.FormulaR1C1 = "011"
    ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "013"
    ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "024"
    ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "025"
    ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "035"
    ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "041"
    ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "051"
    ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "075"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "083"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "111"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "140"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "141"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "142"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "143"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "171"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "180"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "181"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "182"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "184"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "185"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "190"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "261"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "268"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "471"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "512"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "611"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "612"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "613"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "620"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "621"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "622"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "630"
     ActiveCell.Offset(1, 0).Select
    ActiveCell.FormulaR1C1 = "98200"
    
Range("C1:M1").Select
Selection.NumberFormat = "@"
    Range("B1").Select
    ActiveCell.FormulaR1C1 = "Total"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "6500"
     ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7200"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7210"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7220"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7300"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7310"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7320"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7330"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7340"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7400"
    ActiveCell.Offset(0, 1).Select
    ActiveCell.FormulaR1C1 = "7410"
     Range("B2:m35").Select
 Selection.NumberFormat = "$#,##0.00"


Sheets("tempproperty").Select
Range("c:c").Select
Selection.NumberFormat = "@"



'cuts by name to seperate
namerng = Cells.Find("*", [A1], , , xlByRows, xlPrevious).Row
For N = 1 To namerng
name = Range("A1").Value
 On Error Resume Next
    mylastrow = Cells.Find(name, [A1], , , xlByRows, xlPrevious).Row
    mylastcolumn = Cells.Find("*", [A1], , , xlByColumns, xlPrevious).Column
    mylastcell = Cells(mylastrow, mylastcolumn).Address
myrange = "a1:" & mylastcell
Range(myrange).Select
Selection.cut
Sheets.add Type:="Worksheet"
    With ActiveSheet
        .name = name
    End With
    Range("A1").Select
    ActiveSheet.Paste
'sort by property
With Selection
.sort Key1:=Range("C1"), Order1:=xlAscending, Header:=xlGuess, _
        OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
        DataOption1:=xlSortTextAsNumbers
End With
Range("a1").Select

If Range("a1").Value = "Josh Hoversten" Then
Call josh
Else
End If

If Range("a1").Value = "Tracy Nowlin" Then
Call tracy
Else
End If

'cut by property, make into loop for all properties.
proprng = Cells.Find("*", [A1], , , xlByRows, xlPrevious).Row
For p = 1 To proprng
propnumber = Range("C1").Value
mylastrow = Cells.Find(propnumber, [A1], , , xlByRows, xlPrevious).Row
mylastcolumn = Cells.Find("*", [A1], , , xlByColumns, xlPrevious).Column
mylastcell = Cells(mylastrow, mylastcolumn).Address
myrange = "a1:" & mylastcell
Range(myrange).Select
Selection.cut
Sheets.add Type:="Worksheet"
    With ActiveSheet
        .name = "propsheet"
    End With
    Range("A1").Select
    ActiveSheet.Paste
'sort by codes
With Selection
.sort Key1:=Range("D1"), Order1:=xlAscending, Header:=xlGuess, _
        OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
        DataOption1:=xlSortTextAsNumbers
End With

'sort by codes
coderng = Cells.Find("*", [A1], , , xlByRows, xlPrevious).Row
For c = 1 To coderng
codenumber = Range("D1").Value
 On Error Resume Next
    mylastrow = Cells.Find(codenumber, [A1], , , xlByRows, xlPrevious).Row
    mylastcolumn = Cells.Find("*", [A1], , , xlByColumns, xlPrevious).Column
    mylastcell = Cells(mylastrow, mylastcolumn).Address
myrange = "a1:" & mylastcell
Range(myrange).Select
Selection.cut
Sheets.add Type:="Worksheet"
    With ActiveSheet
        .name = "code"
    End With
    Range("A1").Select
    ActiveSheet.Paste
    With Selection
 Range("F1").Value = Application.WorksheetFunction.Sum([b:b])
 End With
 
 If Range("A1").Value = "Employee1" Then
 codehours = Range("F1").Value * Emp1rate
 Else
 End If
 
 If Range("A1").Value = " Employee2" Then
 codehours = Range("F1").Value * Emp2rate
 Else
 End If
 
 If Range("A1").Value = " Employee3" Then
 codehours = Range("F1").Value * Emp3rate
 Else
 End If
 
 If Range("A1").Value = " Employee4" Then
 codehours = Range("F1").Value * Emp4rate
 Else
 End If
 
 If Range("A1").Value = " Employee5" Then
 codehours = Range("F1").Value * Emp5rate
 Else
 End If
 
 If Range("A1").Value = " Employee6" Then
 codehours = Range("F1").Value * Emp6brate
 Else
 End If
 
 If Range("A1").Value = " Employee7" Then
 codehours = Range("F1").Value * Emp7rate
 Else
 End If
 
 If Range("A1").Value = " Employee8" Then
 codehours = Range("F1").Value * emp8rate
 Else
 End If
 
 
 
 
 Sheets("Property").Select
 Range("a1").Select
    mylastrow = Cells.Find(propnumber, [A1], , , xlByRows, xlPrevious).Row
    mylastcolumn = Cells.Find(codenumber, [A1], , , xlByColumns, xlPrevious).Column
    mylastcell = Cells(mylastrow, mylastcolumn).Address
   Range(mylastcell).Select
   If Range(mylastcell).Value <> "" Then
   Range(mylastcell).Value = Range(mylastcell).Value + codehours
   Else
   ActiveCell.FormulaR1C1 = codehours
   End If
   
    Application.DisplayAlerts = False
    Sheets("code").Delete
    Application.DisplayAlerts = True
Sheets("propsheet").Select
  With Application
        .Calculation = xlCalculationManual
    
    'We work backwards because we are deleting rows.
    For j = Selection.Rows.Count To 1 Step -1
        If WorksheetFunction.CountA(Selection.Rows(j)) = 0 Then
            Selection.Rows(j).EntireRow.Delete
        End If
    Next j
  End With
  If Range("A1").Value = "" Then
      Exit For
    Else
    End If
  Next c


 Application.DisplayAlerts = False
    Sheets("propsheet").Delete
    Application.DisplayAlerts = True
Sheets(name).Select
  With Application
        .Calculation = xlCalculationManual
    
    'We work backwards because we are deleting rows.
    For j = Selection.Rows.Count To 1 Step -1
        If WorksheetFunction.CountA(Selection.Rows(j)) = 0 Then
            Selection.Rows(j).EntireRow.Delete
        End If
    Next j
  End With
  If Range("A1").Value = "" Then
      Exit For
    Else
    End If
  Next p

Application.DisplayAlerts = False
    Sheets(name).Delete
    Application.DisplayAlerts = True
Sheets("tempproperty").Select
  With Application
        .Calculation = xlCalculationManual
    
    'We work backwards because we are deleting rows.
    For j = Selection.Rows.Count To 1 Step -1
        If WorksheetFunction.CountA(Selection.Rows(j)) = 0 Then
            Selection.Rows(j).EntireRow.Delete
        End If
    Next j
  End With
  If Range("A1").Value = "" Then
      Exit For
    Else
    End If
  Next N
Sheets("Property").Select

Range("C2:N2").Select
    Range("N2").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C3:N3").Select
    Range("N3").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C4:N4").Select
    Range("N4").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C5:N5").Select
    Range("N5").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C6:N6").Select
    Range("N6").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C7:N7").Select
    Range("N7").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C8:N8").Select
    Range("N8").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C9:N9").Select
    Range("N9").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C10:N10").Select
    Range("N10").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C11:N11").Select
    Range("N11").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C12:N12").Select
    Range("N12").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C13:N13").Select
    Range("N13").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C14:N14").Select
    Range("N14").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C15:N15").Select
    Range("N15").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C16:N16").Select
    Range("N16").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C17:N17").Select
    Range("N17").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C18:N18").Select
    Range("N18").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C19:N19").Select
    Range("N19").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C20:N20").Select
    Range("N20").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C21:N21").Select
    Range("N21").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C22:N22").Select
    Range("N22").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C23:N23").Select
    Range("N23").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C24:N24").Select
    Range("N24").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C25:N25").Select
    Range("N25").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C26:N26").Select
    Range("N26").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C27:N27").Select
    Range("N27").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C28:N28").Select
    Range("N28").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C29:N29").Select
    Range("N29").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C30:N30").Select
    Range("N30").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C31:N31").Select
    Range("N31").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C32:N32").Select
    Range("N32").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C33:N33").Select
    Range("N33").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C34:N34").Select
    Range("N34").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"
Range("C35:N35").Select
    Range("N35").Activate
    ActiveCell.FormulaR1C1 = "=SUM(RC[-12]:RC[-1])"


 Range("N2:N35").Select
    Selection.cut
    Range("B2").Select
    ActiveSheet.Paste

Range("A1").Select
Application.DisplayAlerts = False
    Sheets("tempproperty").Delete
    Application.DisplayAlerts = True
    
Application.ScreenUpdating = True
    
Sheets("finish").Select


End Sub
 
Sort by date Sort by votes
I have a macro that formats a sheet like this, but not so much work. My first question is this: I see you ask for the mileage, but do you put it anywhere? Even on a temp 2nd sheet, it could make it easier to later call that cell.

i.e. Sheet2!A1 = empmileage1, etc.

Then your formula would call to the cell. I am not good with vba remembering an amount for later use, because I don't do it much, but this might be a way to not have to deal with it.

Other than that, have you tried doing the rest of the calculation first and putting the mileage at the end? Just trying to figure a way to change the calculation around.
HTH

misscrf

It is never too late to become what you could have been ~ George Eliot
 
Upvote 0 Downvote


Hi,

It would be alot better if you would focus your question AND your code snippet, rather than throwing it all out there and requiring someone to slog thru lines and lines of code.

Which Find statement is causing the problem?

"If I input any milage, it will not find the location correctly and inputs in to a different Cell. "

Which statement is doing this?

I'd also suggest that your Tempproperty sheet have headings so that it could be used as a TABLE.



Skip,
[sub]
[glasses] [red][/red]
[tongue][/sub]
 
Upvote 0 Downvote
Thanks guys for the input.

misscrf - I did try that and it didn't make a difference (I will re-test though as I may have fouled it up before).

Skip - I apologize for my sloppiness. I will try to re-word the question to make better sence. It is not with a particular line of code that causes the problem, it is the over all effect once i enter the milage.
 
Upvote 0 Downvote



You will have to step thru the code and determine EXACTLY WHERE the problem(s) is/are occurring.

You can't just throw it out here and expect someone to find your problem. No one has your workbook with the data on your sheet running with your code except YOU. It would be like going to the doctor and saying, "Doc, make me feel better!" He's gotta know EXACTLY WHERE you are hurting. That's what we need too.

Skip,
[sub]
[glasses] [red][/red]
[tongue][/sub]
 
Upvote 0 Downvote
Skip, I understand that. That is why i also linked the workbook in my OP.

Aside from that, I have stepped through my code and all the values are correct except when it goes to do a cell.find on the final page to copy the data to the correct cell. The values are correct, but the cell selected is wrong and I can't see why it would be. A hidden"feature" to excel, perhaps, lol.

the only thing I can see if it is reading the reference cell incorrectly somehow.
The issue is that it should look from the reference worksheets to say that value "10.00" should be placed in the intersection of row value "025" and column value "7300". It shows the correct address per the cell.find statements, but the actual cell selected is the intersection of row "620" and column "7300".

I do appriate your help but if this is too much of a mess, then I do apologize and we can let this post drop.

Thanks,

Clayton
 
Upvote 0 Downvote
I wonder if there is some reason that it is offsetting the cell selection. It sounds like it is moving it for some reason. Is it possible that there is data there? I don't understand why you are referencing the row value 025 and column 7300. Why not G25 or whatever?

Wouldn't that be easier?

misscrf

It is never too late to become what you could have been ~ George Eliot
 
Upvote 0 Downvote



What do you mean by, "...on the final page ..."

The most critical parts of loops that often take extra effort to design and code, are the EXIT conditions. Sometimes the last execution occurs AFTER you leave the loop, something like...
Code: 
do while [i]condition[/b]
   DoStuff
loop 
DoStuff 'for the very last condition
of course it varies from case to case.


Skip,
[sub]
[glasses] [red][/red]
[tongue][/sub]
 
Upvote 0 Downvote
I would like to thank everyone for the assistance.

misscrf your idea of using "g" in front of the number was the ticket, now I don't have the issue with it not seeing the correct number based on having a leading 0 and it was easy to pull it out later so it looks like it should.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

sal21
  • Question
scrping in listbox in a web page
Replies
0
Views
170
sal21
sal21
remeng
  • Solved
Combine two working macros into one for MS Word 1
Replies
7
Views
488
strongm
strongm
IcarusHallsorts
  • Locked
  • Question
I have a column of data in Column A
Replies
3
Views
179
Andrzejek
Andrzejek
thanhthanh12
  • Locked
  • Question
Help vba
Replies
3
Views
307
combo
combo
kris gersbach
  • Locked
  • Question
I’m importing a csv into a vfp curs
Replies
1
Views
132
Andrzejek
Andrzejek

Part and Inventory Search

Sponsor

Back
Top