Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IA770 with S8300 and CM5

Status
Not open for further replies.

nx9005

Technical User
Dec 22, 2005
23
GB
Hi, can someone please help me.
I am trying to install an IA770 on an 8300 server loaded with CM5. The problem i have is that the Audix service fails to start. it looks like the old CM3 problem.
I have tried to reload the s/w a couple of times

thanks in advance
 
do you have the IP trunks, signalling group etc, built in CM? have you followed the IA770 installation manual? the IA770 won't come up without having the CM side properly administered. Also, make sure the IA770 integration address is setup when you go through the wizard, or run "configure server"

I have setup about 7 or so CM5 S8300's on G350's, G450's, and G700's, I havn't had any issues so far...

mitch


AVAYA Certified Specialist
 
Hi Mitch,

thanks for replying.

Yes i have have followed the book and i have got my ip trunks etc, i also have my audix ip address in configure server too.

any further ideas?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top