Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
I want to limit the number of Rings on any extension
- Thread starter mehar1
- Start date
- Thread starter
- #2
go to LD 21 and print your CDB, specifically the RDR section. Look at the DFN0/DFN1/DFN2. there are the total number of ring choices per option.
go to LD 20 and print the TN for the phone. Look at the RCO setting. This corresponds to DFN0, yada yada. (RCO 0 = DFN0). If you want to change, you need to change the DFN0 in the RDR block, then change your phone to reflect this number. This will change all phones with that specific setting. So any phones with RCO 0, when you change DFN0, all those will change. Try using DFN2 as DFN0 is most likely the default
John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services
Public Profile
go to LD 20 and print the TN for the phone. Look at the RCO setting. This corresponds to DFN0, yada yada. (RCO 0 = DFN0). If you want to change, you need to change the DFN0 in the RDR block, then change your phone to reflect this number. This will change all phones with that specific setting. So any phones with RCO 0, when you change DFN0, all those will change. Try using DFN2 as DFN0 is most likely the default
John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services
Public Profile
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
