Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I CAN'T MAKE IN OR OUT BOUND CALL ON DTI PRI ON NORTEL ICS 7.0

Status
Not open for further replies.

shadamnet

Technical User
May 20, 2007
10
US
HELLO GUYS I NEED YOUR HELP.I DID THE FOLLOWING PROGRAMMING ON A PRI CONNECTED DIRECTLY TO T1 SMART JACK:
1-ROUTING SERVICES: ROUTE003 DIALOUT:9 USE:pRI-A SVCE TYPE:pUBLIC.
2-DESTINATION CODES: ADD DSTCODE:9 NORMAL MODE ROUTE 003
3-TERMINALS&SETS: LINE ACCESS LINE ASSIGNTS LINE POOL:pRI-A:Y
4-SYSTEM PROGRAM: RECEVEID LENGTH:4
5-LINES: LINE160 TRUNK160 TARGET LINE PUBLIC RECEIVED N:3900
(3900 IS THE 4DIGIT SENT BY T1 PROVIDER TO THE PBX).
6-CBC LIMITS: PRI-A MIN INCOMING:1 MAX INCOMING:23
MIN OUTGOING:1 MAX OUTGOING:23
7-MAINTENANCE: PROVISIONNING L001 TO LO11 PROVISIONED
(CHANNELS 1 TO 11 FOR VOICE AND 12 TO 23 FOR DATA.
THE T1 PROVIDER CAN SEE CLEARLY THE D-CHANNEL.
IF I MAKE A CALL I HAVE A BUSY TONE
IF I DIAL A INCOMPLETE NUMBER I HAVE THE FOLLOWIN MESSAGE:
YOUR CALL CANNOT BE COMPLETED AS IT DIAL PLEASE CHECK THE NUMBER AND DIAL AGAIN.
THE T1 PROVIDER CLAIMS THAT SOME IS MISSING IN THE PROGRAMMING.
THANK FOR YOUR HELP.URGENT








 
dial plan outbound length
--------------------------------------------------------------------------------

Private network
Type None
Priv DN len 3
Type CDP
PrivNetId 1
Priv DN len 3
Type UDP
PrivNetId 1
Loc code None
Priv DN len 3
Public network
Pub DN lengths
Show prefix:
Prfx:Deflt
DN length 7
Dial timeout
Dial timeout 4
Access codes
--------------------------------------------------------------------------------

Line pool codes
Line pool A 9
Park prefix 1
Extrnl code None&
Direct-dial 0
Auto DN None
DISA DN None
PrivAccCode None
Carrier Codes
Prfx: 10
ID length: 3

 
Why do you have a Dial Out Number of 9 in route 3?
 
If you're sharing channels, take a second look at your in/outbound max.
 
hey lugerlover,
if i do what you did post how i m gonna be able to pick up the line and dial outside .
that's why i choose route 003 dial out 9.it allow me to hit intercom 9 and i dial the number to call
 
T1 CHANNEL 1 TO 12
DATA CHANNEL 12 TO 23
PROTOCOL NI-2
B8ZS ESF
 
try no out dial

dest code 9 asorb all

be sure you have the lines provisioned
 
lets recap..
where are we at this point??
we pointed to dial plan for length,did u?
we asked why insert a 9 in dial out?
we asked about inbound/outbound min/max "channels
 
The desti code allows you to hit intercom 9, not the Dial Out in the Route. By putting a 9 in the Dial Out this means that everytime you make a phone call using Route 3 the sytem will put a 9 in front of the number you dial.
 
hi every body
sorry guys i did not try the things you told yet because the place is
close for the holliday.
by the middle of the week i will go there and try. thanks
 
is your public DN lenght at 10, for 10 digit dialing?
 
HI EVERYBODY,

WELL THE MAIN PROBLEM WAS DIAL OUT SHOULD BE NO NUMBER.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top