Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I cant heard a secondary dial tone on IPOFFICE

Status
Not open for further replies.

bnosummer

Technical User
Feb 22, 2010
18
MX
According with the thread940-1464170 , i have pretty much the same issue, i can heard a secondary dial tone, i have in the shortcodes:
Code: 8N
Feature: Dial
Phone Numer : N
Grou of Lines ID: 50: [8] (ARS)

i have check the field secondary dial tone with all my routes
 
Do you have any user short codes?

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
 
but the problem happens with users that doesnt have any short codes
 
Try;

Code: [8]N
Feature: Dial
Phone Numer : N
Lines ID: 50 ARS

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
I've seen this same issue in the 4.1's. Even though you have a system short code of 8N, add the samd 8N short code to each user profile or a user rights group and you will get dialtone. Can't explain why but it works.

ACA
ACS
CompTIA Convergence+
CCNA
CCVP
 
Are you setup on SCN? Do you have any sites/extensions that begin with 8?
 
This system has been upgraded from 3.x or lower to 4.0 or higher.
I have seen that the ARS that is created is broken.
Make a new one or default the system and start all over again.

Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top